Description: PCB Mount SMA Female Jack Solder Clip PCB Edge Straight RF Adapter Connector

Using a threaded interface, SMA 50 Ohm connectors are semi-precision units that provide excellent electrical performance from DC to 6 GHz and outstanding mechanical durability. SMA connectors feature stainless steel or brass construction and ¼ – 36 threaded coupling, which offers high performance in a compact design.

For phase array radar, test equipment, ILS landing systems and other instrumentation using phase matching techniques, SMA interconnects offer a precise and simple means of phase adjustment for microwave devices. Built in accordance with MIL-C-39012 and CECC 22110/111, SMA connectors can be mated with all connectors that meet these specification mating diameters regardless of manufacturer.

Specifications:

Connector type: SMA Female
Material Type
Housing: Brass
Insulation quality : PTFE
Plating: Gold plated Pu
Connector Type: SMA male screw bore
Operation Temperature-40 ° C ~ + 65 ° C
Storage Temperature-40 ° C ~ + 80 ° C
Connector Durability : 500 Cycles;
Thread Diameter : 6mm;
Contact Pin Distance : 4mm
Total Size: 6.5 x 6.5 x 14mm

Electrical

Impedance 50 Ω
Frequency Range Semi rigid 0 – 18 GHz
Voltage Rating 375 volts peak
Dielectric Withstanding Voltage
1,000 volts rms
VSWR Straight connectors on .141″ S/R: 1.05 + .005 f (GHz)
Straight connectors on RG-174: 1.20 + .025 f (GHz)
Insertion Loss .03 v[f (GHz)] dB maximum
Insulation Resistance 5,000 MΩ
RF Leakage -60 dB minimu

Mechanical

Mating .250-36 threaded coupling
Cable Affixment Crimp or solder types
Center Conductor Solder
Cable Retention 60 – 80 lbs depending on cable

Material

Center Contact Beryllium copper, gold-plated
Crimp Ferrule Copper tubing
Other Metal Parts Non-magnetic passivated stainless steel or brass, gold or silver-plated
Insulators TFE
Temperature Range -65°C to +165°C

Features:

RF Adapter. Great for many projects which involves SMA Type connector.
Connect SMA to PCB Panel Edge Mount Type Device Compatible with SMA Connectors,
Used for Connecting a RP SMA Female to PCB Panel Edge Mount jack.

Applications:

Widely used for Antennas, Broadcast, Radios, Wi-Fi, Telecom, Coaxial cable, LMR, Wireless LAN Devices, CCTV, Microwave Applications and Digital Communication

Package Include: 

1x PCB Mount SMA Female Jack Solder Clip PCB Edge Straight RF Adapter Connector For SMA Antenna

SMA GPS Antenna Frequency 1575.42 MHz Patch Antenna For Electronics Project Electrical Circuitry & Parts

This GPS Antenna GPS-001 can normally and stably receive satellite signal even in bad weather and environment. Widely used in factory, 4S shop, car dealer, bus station voice prompt machine, driving school, taxi company, DVD wholesale, car maintenance etc.

Features:

3 Meters GPS Antenna

Active Gain for better signal

Built-in Powerful Low Noise Amplifier

Magnetic Base

Waterproof

Antenna Specification:

Center Frequency 1575.42±3 MHz

V.S.W.R 2:1

Band Width ±5 MHz

Impendence 50Ω

Peak Gain ＞3dBic Based on 7×7cm ground plane

Gain Coverage ＞-4dBic at -90°＜0＜+90°(over 75% Volume)

Polarization RHCP

LNA/Filter LNA

Gain Without Cable 28dB Typical

Cable Gain ±2dBi

Noise Figure 2.0dB

Filter Out Band Attenuation (f0=1575.42MHz) , 7dB Min f0+/-20MHz; 20dB Min f0+/-50MHz; 30dB Min f0+/-100MHz

V.S.W.R ＜2.0

DC Voltage 3V，5V，3V to 5V

DC current 7-10MA

How to use:

(1) Separate the tape and attach antenna unit where.

(2) Coaxial cable to connect the antenna to the receiver antenna jack and turn on the + 5V power supply.

(3) Put the coaxial cable away from high temperature parts and more like a cable shield to prevent direct sunlight.

Note:

1. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.

2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Package Include:

• 1 x SMA GPS Antenna Frequency 1575.42 MHz Patch Antenna For Electronics Project

HC06 Bluetooth Module 4 Pin HC 06 Bluetooth Module Serial Port HC06 Integrated Bluetooth Serial Port HC06 Module For Arduino

The HC-06 is a class 2 slave Bluetooth module designed for transparent wireless serial communication. Once it is paired to a master Bluetooth device such as PC, smart phones and tablet, its operation becomes transparent to the user. All data received through the serial input is immediately transmitted over the air. When the module receives wireless data, it is sent out through the serial interface exactly at it is received. No user code specific to the Bluetooth module is needed at all in the user microcontroller program.

The HC-06 will work with supply voltage of 3.6VDC to 6VDC, however, the logic level of RXD pin is 3.3V and is not 5V tolerant. A Logic Level Converteris recommended to protect the sensor if connect it to a 5V device (e.g Arduino Uno and Mega).

NOTE: This module does not support AT command.

Specification:

Model: HC-06
Pin: 4 Pin
Input Voltage: DC 5V
Communication Method: Serial Communication
slave mode
Can be easily interfaced with Laptop or Mobile phones with Bluetooth
Serial Bluetooth module for Arduino and other microcontrollers

Features:

The module is mainly used for short-distance wireless data transmission field. You can easily and PC-connected Bluetooth devices, you can also exchange data between the two modules. To avoid cumbersome cable connection, can directly replace the serial line.
Bluetooth wireless data transmission
Industrial remote control, telemetry
POS system, wireless keyboard, mouse
Traffic, underground location, alarm
Automated data acquisition system
Wireless data transmission; banking system

Pin Descriptions:

VCC: 5V
GND: Ground
RXD: Receiver, Bluetooth module receives from another device sent data; normally connected to other devices transmitting end TXD.
TXD: sending end, the Bluetooth module to send data to other devices; receiving terminal is normally connected to other devices RXD

Applications:

Wireless communication between two microcontrollers
Communicate with Laptop, Desktops and mobile phones
Data Logging application
Consumer applications
Wireless Robots
Home Automation

Package Include:

1 x Serial Port HC-06 Integrated Bluetooth Module Wireless Serial Port 4 Pin HC06 Board For Arduino Electronics Project

HC08 Bluetooth Module 6 Pin CC2541 HC 08 Bluetooth Module Serial Port HC08 Integrated Bluetooth 4.0 BLE Wireless Serial Port HC08 Module

HC-08 CC2541 Bluetooth 4.0 BLE to UART transceiver module with transparent serial port to Arduino Bluetooth module. SH-HC-08 is a next generation, Class 2 Bluetooth 4.0 BLE module. It uses TI CC2541 Bluetooth 4.0 BLE Chip.Support the AT command, the user can according to the need to change the baud rate of the serial port, device name, parameters, such as corresponding password, use agile. SH-HC-08 is ahighly and sophisticated integrated Bluetooth module which contains all necessary elements. So SH-HC-08 offers an ideal solution for developers who want to integrate Bluetooth wireless technology into their designs with limited knowledge of Bluetooth and RF technologies.

Overview:

SH-HC-08  is a subsequent-generation, class 2, Bluetooth four.0 ble module.  It makes use of TI CC2541bluetooth four.0 ble  chip .Support the AT command, the person can in keeping with deserve to trade the baud cost of serial port, name of gadget, matching parameters reminiscent of password, use agile. SH-HC-08  is ahighly integrated and complicated Bluetooth module, containing the entire necessary elements .Therefore SH-HC-08  provides an excellent answer for builders who wish to combine Bluetooth wireless know-how into their designs with limited abilities of Bluetooth and RF applied sciences.

• 1,Core module makes use of SH-HC-08, leads from the module interface contains VCC, GND, TXD, RXD,  LED reputation output pin.
• 2, led point out Bluetooth connection reputation, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane
• 3, 3.3V LDO enter voltage three.6 ~6V,  the enter voltage to prohibit greater than 7V!
• 4, the interface level three.3V, can be without delay linked the a considerable number of SCM (51, AVR, PIC, ARM, MSP430, etc.), the 5V MCU can also be connected without delay, without MAX232 cannot go during the MAX232!
• 5, open to the advantageous distance of 10 meters, over 10 meters is additionally feasible, but now not of this the first-rate of the connection of the gap do to be certain
• 6, after the pair when full-duplex serial port to make use of, do not deserve to be aware of anything concerning the Bluetooth protocol, but simplest supports eight information bits, 1 cease bit, no parity communication layout, which is the most frequently used communication layout does not help other codecs .
• 7, support for Bluetooth connection is not dependent by means of the AT command set the baud cost, name, passkey, set parameters are saved after. Bluetooth connection is instantly switched to the circulate-through mode
• 8, compact (3.57cm * 1.52cm), the manufacturing facility chip construction to be certain the placement first-rate. And units of clear heat reduce tubing, dust and delightful, and anti-static

Feature:

• Bluetooth protocol: Bluetooth V4.0 Specification ble,
• open environment and iPhone 4 S can reach 110metros extreme distance communication.
• Based on TI CC2541 chipset
• Bluetooth Class 2
• industrial level SPP Bluetooth module
• Chip integrated antenna
• Size: 26,7x13x2milímetros
• Industrial temperature range of -40 to +85
• Support for board applications
• Operating Frequency: 2.4 GHz ISM band
• Modulation Method: GFSK (Gaussian Frequency Shift Keying key)
• Accuracy: -84 dBm or less for 0.1% BER
• Throughput: asynchronous: 6 kbps synchronous: kbps
• Security Features: Authentication and encryption
• Support Services: Central and Peripheral UUID FFE0, FFE1
• Power consumption: automatic sleep mode, standby current to 400 ~ 1.5 m, 8.5 m transfer.
• Power supply: 3.3 VDC 50 mA

Application:

• Cable replacement
• Systems point-of-sale
• barcode readers and pay terminals
• Telemetry devices and machine-to-machine
• logistics and transport systems
• Automotive inspection and measurement systems
• Medical Systems
• fitness telemetry devices and sports
• Pdaand other portable terminals
• PCs and laptop
• OBD

Package Include:

• 1 x HC 08 CC2541 Bluetooth Module Serial Port HC-08 Integrated Bluetooth 4.0 BLE Module Wireless Serial Port 6 Pin HC08 Board

HC05 Bluetooth Module 6 Pin HC 05 Bluetooth Module Serial Port HC05 Integrated Bluetooth Serial Port HC05 Module For Arduino

you need to attach this to a computer. You can either solder a 6-pin header or individual wires. Unit comes without a connector. Please see related male and female pins below. And now, we provide HC-05, HC-05 could be setting to Master or Slave by user. HC-05 just be Master or Slave, that could be customized.

SMA GPS Flat Blade Antenna Frequency 915 MHz With 3M Adhesive Sticker Mount Patch Antenna

This antenna and the vandal resistant version in options literally pick up double the signal of the standard internal antenna.

If your GSM device is mounted inside a metal enclosure or metal surrounded area like a shed, you will need to fit one of these external antennas for Gsw1 and Gsw2

Specifications:

Name: Patch Antenna
Frequency Range: 915MHz
Gain: 3dbi
Polarization: Vertical
Maximum input power: 50 Watt
Impedance: 50
Weight: 50gm
VSWR: 1.5
Cable Length: 3M
Product Keywords: Compatible Adhesive Mount Vehicle Cb Radio Wifi Patch Antenna

Features:

Blade Antenna 915Mhz
This antenna and the vandal resistant version in options literally pick up double the signal of the standard internal antenna.
If your GSM device is mounted inside a metal enclosure or metal surrounded area like a shed, you will need to fit one of these external antennas for Gsw1 and Gsw2.

Package Include:

• 1 x SMA GPS Flat Blade Antenna Frequency

Wired GSM PCB Antennas 2.4GHz 2.5dBi Built In PCB Antenna Module For Electronics Engineering Project DIY GSM Antenna Electrical Circuitry & Parts

PCB 2.5dB Antenna with IPX Connector Cable for GSM/GPRS/3G/4G 900/1800/2100 Bands. This is a multiband WiFi Bluetooth, GSM PCB Antenna with IPX Connector Cable. This microstrip antenna consists of a patch of metal foil of various shapes (a patch antenna) on the surface of a PCB, with a metal foil ground plane on the other side of the board.

Specifications:

• Frequency Range:824-960 / 1710-1990/2010-2170MHZ
• S.W.R. <= 2.0
• VSWR: Less than or equal to 2.0
• Antenna Gain 2.5dBi
• Impedance 50 Ohm
• Block Resistance: 50
• Cable Type O.D. 1.13 mm
• Polarization: Omni direction
• Connector : IPX connector (Use U.FL as mating connector)
• Antenna PCB Dimensions: 35.4mm x 6.7mm x1.0mm
• IPX Connector Cable length : ~80mm – 140mm
• Weight: 1.0gm

Applications:

• GSM Antenna for GSM Modules such as SIM900 SIM800L SIM908 SIM800C

Package Include:

• 1x Wired GSM PCB Antenna 2.4G 2.5db Built In PCB Antenna Module For Electronics Engineering Project DIY GSM Antenna

Antenna 433MHz 2dBi Lora SMA Male Connectors Aerial Antenna SMA Female SMA Antenna LoRa 3dBi 433MHz Omni-Directional Electrical Circuitry & Parts

This a tilt (folding), 433MHz Whip Antenna, with a SMA male Connector. We have tested and compared antennas from several companies, and decided on these antennas manufactured in Taiwan. We found they had about 1-2 dBm better performance than some of the cheaper types available.

Note that there are two types of SMA connectors in common use, the SMA male, and RP-SMA. This antenna has a SMA male connector, which has a small pin inside the connector (see picture below).

Specifications:

• Frequency (MHz）： 433±5
• VSWR: ≤ 2
• Gain dBi (）： ≥ 2
• Power (W）： 50
• Polarization ：Vertical
• Input Impedance（Ω）： 50
• Antenna Length (mm）： 95
• Connector： SMA
• Weight: 12g
• Size: L105×W10×H10 mm
• Antenna Color: black

Package Include:

• 1 x SMA Male Antenna LoRa 2dBi 433MHz Omni-Directional