Sensors – Udvabony.com – Electronics, Sensors, Robotics Online Shop https://udvabony.com Udvabony Is One Of The Largest Robotics, Sensors & Electronics Online Shop In Bangladesh, That Sells Electronics, Sensors & Robotics Parts & Components. Arduino accessories Cables Sensors LED LCD Displays Raspberry Pi Wireless Iot esp32 pcb Wed, 01 Jan 2025 08:31:26 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.2 https://udvabony.com/wp-content/uploads/2021/03/cropped-fav-01-32x32.png Sensors – Udvabony.com – Electronics, Sensors, Robotics Online Shop https://udvabony.com 32 32 12V Battery Incubator AC DC Line Changer Controller Circuit https://udvabony.com/product/12v-battery-incubator-ac-dc-controller/ https://udvabony.com/product/12v-battery-incubator-ac-dc-controller/#respond Wed, 18 Dec 2024 01:09:05 +0000 https://udvabony.com/?post_type=product&p=165305 Description: Incubator AC DC Line Changer Controller Circuit

12V Battery Incubator AC DC Line Changer Controller Circuit

Features:

  • Line Voltage: AC 220V
  • Controller Supply: 12V Adapter
  • Backup Battery : 12V DC
  • W1209/ XH-M452 will run on line power when power is present
  • When there is no power, the relay in the circuit will automatically provide power from the 12V back-up battery
  • When power is restored, the circuit relay automatically switches the line from the back-up battery to the AC 220 volt line.
  • Back-up battery and 12 volt adapter are not included in this package. Must buy separately
  • Connection diagram is given in figure 2 and 3
  • Back-up battery and 12 volt adapter are not included in this package. Must buy separately

  • Incubator AC DC Line Changer

Package Include:

1 x 12V Battery Incubator AC DC Line Changer Controller Circuit

]]> https://udvabony.com/product/12v-battery-incubator-ac-dc-controller/feed/ 0 70KG Pressure Sensor Load Cell Amplifier Single Point Aluminum Alloy Pressure Weight Measurement Sensor 70kg Capacity For Electronic Scale Tools With 9 Inch Cable https://udvabony.com/product/70kg-pressure-sensor-load-cell-amplifier/ https://udvabony.com/product/70kg-pressure-sensor-load-cell-amplifier/#respond Tue, 26 Nov 2024 07:56:50 +0000 https://udvabony.com/?post_type=product&p=164652 Description: Load Cell Amplifier Single Point Aluminum Alloy Pressure 

70KG Pressure Sensor Load Cell Amplifier Single Point Aluminum Alloy Pressure Weight Measurement Sensor 70kg Capacity For Electronic Scale Tools With 9 Inch Cable

Features:

  • Name: 70kg high accuracy aluminum single point Load Cells
  • Material: Aluminum
  • Capacity: 3-70kg
  • Accuracy: C3
  • Size: 97x23x20mm
  • l Made of aluminum alloy.
  • l High accuracy, high side load tolerance
  • l Easy to install, IP65 protection
  • l Mainly used for electronic scales, electronic balance, price computing scales and industrial weighing systems

Package Include:

  • 1 x 70KG Pressure Sensor Load Cell
]]> https://udvabony.com/product/70kg-pressure-sensor-load-cell-amplifier/feed/ 0 130KG Pressure Sensor Load Cell Amplifier Single Point Aluminum Alloy Pressure Weight Measurement Sensor 130kg Capacity For Electronic Scale Tools With 1 Gauge Cables https://udvabony.com/product/130kg-pressure-sensor-load-cell-amplifier/ https://udvabony.com/product/130kg-pressure-sensor-load-cell-amplifier/#respond Tue, 26 Nov 2024 05:27:36 +0000 https://udvabony.com/?post_type=product&p=164632 Description: 130KG Pressure Sensor

130KG Pressure Sensor Load Cell Amplifier Single Point Aluminum Alloy Pressure Weight Measurement Sensor 130kg Capacity For Electronic Scale Tools With 1 Gauge Cable

Features:

  • Name: 130kg high accuracy aluminum single point Load Cells
  • Material: Aluminum
  • Capacity: 3-130kg
  • Accuracy: C3
  • Size: 130x27x20mm
  • l Made of aluminum alloy.
  • l High accuracy, high side load tolerance
  • l Easy to install, IP65 protection
  • l Mainly used for electronic scales, electronic balance, price computing scales and industrial weighing systems

Package Include:

  • 1 x 130KG Pressure Sensor
]]> https://udvabony.com/product/130kg-pressure-sensor-load-cell-amplifier/feed/ 0 Round Rice Cooker Thermostat Temperature Sensor Rice Cooker Magnetic Steel Temperature Limiter Auto Electric Rice Cooker Temperature Limiter Thermostat Sensor Tools  https://udvabony.com/product/rice-cooker-thermostat-temperature-sensor/ https://udvabony.com/product/rice-cooker-thermostat-temperature-sensor/#respond Thu, 31 Oct 2024 16:35:59 +0000 https://udvabony.com/?post_type=product&p=163911

Description: Rice Cooker Thermostat Temperature Sensor

Round Rice Cooker Thermostat Temperature Sensor Rice Cooker Magnetic Steel Temperature Limiter Auto Electric Rice Cooker Temperature Limiter Thermostat Sensor Tools

Rice Cooker Thermostat Magnetic Center Thermostat Limiter Sensor Temperature Controllers For Auto Electric Rice Cooker Top One Magnetic Steel Electric Rice Cooker Round Thermostat Sensor

Electric Rice Cooker Temperature Limiter Magnet Rice Cooker Magnet Steel Temperature Limiter Electric Cooker Thermostat

Specifications:

  • Product Name : Rice Cooker Magnetic Temperature Sensor;
  • Material : Stainless Steel
  • Color : Silver Tone;
  • Diameter : 36mm / 3.6cm / 1.4″ (Top), 4cm/1.57″ (Bottom)
  • Overall Size : 5 x 4.9cm/1.96″ x 1.9″ (H*Max.D)
  • Weight : 40g
  • 100% original products

Features:

  • 1.Stainless steel and durable inner pot
  • 2.Automatic temperature control
  • 3.High quality
  • 4.CE&ROHS 50080002 Model: Rice cooker – temperature limiter magnet – Electric rice cooker parts-

Package Includes:

  • 1 x Rice Cooker Thermostat Temperature Sensor
]]> https://udvabony.com/product/rice-cooker-thermostat-temperature-sensor/feed/ 0 MC-31 Wired Magnetic Door Window Contact Reed Switch Magnetic Sensor Door Window Security Alarm System NC Normally Open Magnetic Switch Surface Mount https://udvabony.com/product/wired-magnetic-door-window-contact-reed-switch/ https://udvabony.com/product/wired-magnetic-door-window-contact-reed-switch/#respond Tue, 19 Dec 2023 08:58:23 +0000 https://udvabony.com/?post_type=product&p=155650

Description: MC-31 Wired Magnetic Door Window Contact Reed Switch 

MC-31 Wired Magnetic Door Window Contact Reed Switch Magnetic Sensor Door Window Security Alarm System NC Normally Open Magnetic Switch Surface Mount

There are two types of reed switches: “normally open” reed switches and “normally open” reed switches. The metal reeds on a normally Close switch stay Close when there is no magnet near the switch. In the presence of a magnetic field, the contacts of a normally-Close reed switch will Open. A normally-Open reed switch is Opened when it is not near a magnet; as a magnet is brought Open to it, a normally-Close switch will open.

  • Switch Type: NC(normal Open type), circuit is connected when magnet is near the switch.
  • The reed switch is an electrical switch operated by an applied magnetic field.
  • Designed for use with alarm systems. Great for use in family and factory window, door. etc.
  • Ideal for residential or commercial use. Designed to do embedded in door or window frame in door or window frames.
  • With double-sides tape design that for easily install.

Features:

  • Appearence of small and easy to install
  • Long period of use
  • Control the switch of the circuit via the built-in magnet
  • Can be used in places like apartment, hotel, office, etc
  • Ideal for residential or commercial use
  • Designed to do embedded in the door or window frame
  • With double-sides tape design for easily install

Note:

  • Please note that this item not fit to iron or aluminum alloy door. It will decline magnetic of the sensor.

Specifications:

  • Material : Plastic
  • Color: White
  • Actuation distance: 15mm – 25mm
  • Voltage : Normal system up to 24V. Not recommended to connect higher voltage or AC supply.
  • Box size (each side): 65x30mm
  • Weight: 20g

Note:

  • Please allow 0-1mm error due to manual measurement. pls make sure you do not mind before you bid
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Packing Include:

  • 1 x MC-31 Wired Magnetic Door Window Contact Reed Switch Magnetic Sensor Door Window Security Alarm System NC Normally Open Magnetic Switch Surface Mount
]]> https://udvabony.com/product/wired-magnetic-door-window-contact-reed-switch/feed/ 0 BLACK NTC 10D-20 20mm Leaded Epoxy Coated Thermistor Temperature Sensor NTC 10 Ohm Thermal Resistor 10 Ohm Thermistor 2 Pin Leads https://udvabony.com/product/black-ntc-10d-20-20mm-leaded-epoxy-coated/ https://udvabony.com/product/black-ntc-10d-20-20mm-leaded-epoxy-coated/#respond Mon, 23 Oct 2023 07:14:53 +0000 https://udvabony.com/?post_type=product&p=153874 Description: NTC 5D-20 20mm Thermistor Temperature Sensor

BLACK NTC 10D-20 20mm Leaded Epoxy Coated Thermistor Temperature Sensor NTC 10 Ohm Thermal Resistor 10 Ohm Thermistor 2 Pin Leads

This NTC thermister is a transducer which converting from heat energy into electrical energy and its resistance decreases when temperature increases. The NTC temperature sensors are made from a mixture of metal oxides which are subjected to a sintering process that gives them a negative electrical resistance versus temperature (R/T) relationship.

Thermistor is an electronic component used to calculate the temperature. This is a type of resistor whose resistance varies with change in temperature. These NTC thermistors are made up from the combination of metal oxides which passed through sintering process which gives negative electrical resistance versus temperature (R/T) relationship to it. Due to having a large negative slope, a small change in temperature cause a huge change in electrical resistance.

Basically, there are two types of thermistor; one is NTC (Negative Temperature Coefficient) and second one is PTC (Positive Temperature Coefficient). If the thermistor is NTC type, then it decreases the resistance as increase in temperature and PTC behavior is just opposite to the NTC. A thermistor is connected with any electrical circuit to measure the temperature of the body or the substance. This thermistor’s operating temperature range is -55 °C to 125 °C, the range of the temperature is depend upon the base resistance.

NTC Thermistor Features:

  • Come with broad resistance range
  • Thermistor cost is economical
  • Provided with lacquer-coated thermistor disk
  • Copper leads have coating of tin.
  • Having lead spacing of 5.0 mm
  • Component remarked with resistance and tolerance
  • Good stability, durability in environment
  • Provide high accuracy in resistance and B-constant
  • Product is not containing lead
  • Small in size, high-powered, and very capable of bringing
  • down the surge current
  • Quick in reaction
  • High in B value and low in residual current
  • Long service life and high reliability
  • High coefficient of safety and a wide range of application

Technical Specifications:

  • Resistance at 25 degrees C: 1K +- 5%
  • Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air)approx.7.5mW/K
  • Thermal cooling time constant <= (in air) 20 seconds
  • Temperature Coefficient Type: NTC
  • Thermal Time Constant: 10s
  • Resistance  10Ω
  • Tolerance: ±5%
  • Maximum Power Rating: 75mW
  • Maximum Operating Temperature: +150°C
  • Minimum Operating Temperature: -80°C
  • Dimensions(dia.): 20mm
  • Length: 30mm
  • Application: Compensation, Control, Measurement, etc.

Applications:

  • Domestic application – Fridges, freezers, cookers and deep-fat fryers etc.
  • Industrial, Telecommunication application – Process control, heating and ventilation, air conditioning, fire alarms, temperature protection in battery management/charging systems, Video and audio equipment, mobile phones and camcorders etc.
  • Automotive application – Inlet air-temperature control, engine temperature control, airbag electronic systems etc.
  • Thermistor can be used for temperature compensation, temperature measurement, temperature controlling.
  • Inlet air-temperature control.
  • Transmission oil temperature control.
  • Engine temperature control.
  • Airco systems.
  • Airbag electronic systems.
  • Temperature detection of laser diode in CD players for cars.
    Frost sensors.

Package included:

  • 1 x BLACK NTC 10D-20 20mm Leaded Epoxy Coated Thermistor Temperature Sensor NTC 10 Ohm Thermal Resistor 10 Ohm Thermistor 2 Pin Leads
]]> https://udvabony.com/product/black-ntc-10d-20-20mm-leaded-epoxy-coated/feed/ 0 BLACK NTC 10D-25 25mm Leaded Epoxy Coated Thermistor Temperature Sensor NTC 10 Ohm Thermal Resistor 10 Ohm Thermistor 2 Pin Leads https://udvabony.com/product/black-ntc-10d-25-25mm-leaded-epoxy-coated/ https://udvabony.com/product/black-ntc-10d-25-25mm-leaded-epoxy-coated/#respond Mon, 23 Oct 2023 07:05:24 +0000 https://udvabony.com/?post_type=product&p=153867 Description: NTC 10D-25 25mm Thermistor Temperature Sensor

BLACK NTC 10D-25 25mm Leaded Epoxy Coated Thermistor Temperature Sensor NTC 10 Ohm Thermal Resistor 10 Ohm Thermistor 2 Pin Leads

This NTC thermister is a transducer which converting from heat energy into electrical energy and its resistance decreases when temperature increases. The NTC temperature sensors are made from a mixture of metal oxides which are subjected to a sintering process that gives them a negative electrical resistance versus temperature (R/T) relationship.

Thermistor is an electronic component used to calculate the temperature. This is a type of resistor whose resistance varies with change in temperature. These NTC thermistors are made up from the combination of metal oxides which passed through sintering process which gives negative electrical resistance versus temperature (R/T) relationship to it. Due to having a large negative slope, a small change in temperature cause a huge change in electrical resistance.

Basically, there are two types of thermistor; one is NTC (Negative Temperature Coefficient) and second one is PTC (Positive Temperature Coefficient). If the thermistor is NTC type, then it decreases the resistance as increase in temperature and PTC behavior is just opposite to the NTC. A thermistor is connected with any electrical circuit to measure the temperature of the body or the substance. This thermistor’s operating temperature range is -55 °C to 125 °C, the range of the temperature is depend upon the base resistance.

NTC Thermistor Features:

  • Come with broad resistance range
  • Thermistor cost is economical
  • Provided with lacquer-coated thermistor disk
  • Copper leads have coating of tin.
  • Having lead spacing of 5.0 mm
  • Component remarked with resistance and tolerance
  • Good stability, durability in environment
  • Provide high accuracy in resistance and B-constant
  • Product is not containing lead
  • Small in size, high-powered, and very capable of bringing
  • down the surge current
  • Quick in reaction
  • High in B value and low in residual current
  • Long service life and high reliability
  • High coefficient of safety and a wide range of application

Technical Specifications:

  • Resistance at 25 degrees C: 1K +- 5%
  • Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air)approx.7.5mW/K
  • Thermal cooling time constant <= (in air) 20 seconds
  • Temperature Coefficient Type: NTC
  • Thermal Time Constant: 10s
  • Resistance  10Ω
  • Tolerance: ±5%
  • Maximum Power Rating: 75mW
  • Maximum Operating Temperature: +150°C
  • Minimum Operating Temperature: -80°C
  • Dimensions(dia.): 25 mm
  • Length: 30mm
  • Application: Compensation, Control, Measurement, etc.

Applications:

  • Domestic application – Fridges, freezers, cookers and deep-fat fryers etc.
  • Industrial, Telecommunication application – Process control, heating and ventilation, air conditioning, fire alarms, temperature protection in battery management/charging systems, Video and audio equipment, mobile phones and camcorders etc.
  • Automotive application – Inlet air-temperature control, engine temperature control, airbag electronic systems etc.
  • Thermistor can be used for temperature compensation, temperature measurement, temperature controlling.
  • Inlet air-temperature control.
  • Transmission oil temperature control.
  • Engine temperature control.
  • Airco systems.
  • Airbag electronic systems.
  • Temperature detection of laser diode in CD players for cars.
    Frost sensors.

Package included:

  • 1 x BLACK NTC 10D-25 25mm Leaded Epoxy Coated Thermistor Temperature Sensor NTC 10 Ohm Thermal Resistor 10 Ohm Thermistor 2 Pin Leads
]]> https://udvabony.com/product/black-ntc-10d-25-25mm-leaded-epoxy-coated/feed/ 0 BLACK NTC 10D-22 22mm Leaded Epoxy Coated Thermistor Temperature Sensor NTC 10 Ohm Thermal Resistor 10 Ohm Thermistor 2 Pin Leads https://udvabony.com/product/ntc-10d-22-22mm-leaded-coated-thermistor/ https://udvabony.com/product/ntc-10d-22-22mm-leaded-coated-thermistor/#respond Mon, 09 Jan 2023 12:28:14 +0000 https://udvabony.com/?post_type=product&p=147103 Description: BLACK NTC 10D-22 22mm Leaded Epoxy 

BLACK NTC 10D-22 22mm Leaded Epoxy Coated Thermistor Temperature Sensor NTC 10 Ohm Thermal Resistor 10 Ohm Thermistor 2 Pin Leads

This NTC BLACK NTC 10D-22 22mm Leaded Epoxy Coated Thermistor is a transducer which converting from heat energy into electrical energy and its resistance decreases when temperature increases. The NTC temperature sensors are made from a mixture of metal oxides which are subjected to a sintering process that gives them a negative electrical resistance versus temperature (R/T) relationship.

Thermistor is an electronic component used to calculate the temperature. This is a type of resistor whose resistance varies with change in temperature. These NTC thermistors are made up from the combination of metal oxides which passed through sintering process which gives negative electrical resistance versus temperature (R/T) relationship to it. Due to having a large negative slope, a small change in temperature cause a huge change in electrical resistance.

Basically, there are two types of thermistor; one is NTC (Negative Temperature Coefficient) and second one is PTC (Positive Temperature Coefficient). If the thermistor is NTC type, then it decreases the resistance as increase in temperature and PTC behavior is just opposite to the NTC. A thermistor is connected with any electrical circuit to measure the temperature of the body or the substance. This thermistor’s operating temperature range is -55 °C to 125 °C, the range of the temperature is depend upon the base resistance.

NTC Thermistor Features:

  • Come with broad resistance range
  • Thermistor cost is economical
  • Provided with lacquer-coated thermistor disk
  • Copper leads have coating of tin.
  • Having lead spacing of 5.0 mm
  • Component remarked with resistance and tolerance
  • Good stability, durability in environment
  • Provide high accuracy in resistance and B-constant
  • Product is not containing lead
  • Small in size, high-powered, and very capable of bringing
  • down the surge current
  • Quick in reaction
  • High in B value and low in residual current
  • Long service life and high reliability
  • High coefficient of safety and a wide range of application

Technical Specifications:

  • Resistance at 25 degrees C: 1K +- 5%
  • Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air)approx.7.5mW/K
  • Thermal cooling time constant <= (in air) 20 seconds
  • Temperature Coefficient Type: NTC
  • Thermal Time Constant: 10s
  • Resistance  10Ω
  • Tolerance: ±5%
  • Maximum Power Rating: 75mW
  • Maximum Operating Temperature: +150°C
  • Minimum Operating Temperature: -80°C
  • Dimensions(dia.): 22 mm
  • Length: 30mm
  • Application: Compensation, Control, Measurement, etc.

Applications:

  • Domestic application – Fridges, freezers, cookers and deep-fat fryers etc.
  • Industrial, Telecommunication application – Process control, heating and ventilation, air conditioning, fire alarms, temperature protection in battery management/charging systems, Video and audio equipment, mobile phones and camcorders etc.
  • Automotive application – Inlet air-temperature control, engine temperature control, airbag electronic systems etc.
  • Thermistor can be used for temperature compensation, temperature measurement, temperature controlling.
  • Inlet air-temperature control.
  • Transmission oil temperature control.
  • Engine temperature control.
  • Airco systems.
  • Airbag electronic systems.
  • Temperature detection of laser diode in CD players for cars.
    Frost sensors.

Package included:

  • 1 x BLACK NTC 10D-22 22mm Leaded Epoxy Coated Thermistor Temperature Sensor NTC 10 Ohm Thermal Resistor 10 Ohm Thermistor 2 Pin Leads
]]> https://udvabony.com/product/ntc-10d-22-22mm-leaded-coated-thermistor/feed/ 0 Automatic Day Light Switch Out Door On Off Photo- Electric Street Lighting Control ASO -AS-10 Sun Switches AC 220V 10A Metal Type https://udvabony.com/product/automatic-day-light-switch-photo-electric/ https://udvabony.com/product/automatic-day-light-switch-photo-electric/#respond Tue, 20 Sep 2022 03:25:20 +0000 https://udvabony.com/?post_type=product&p=144183 Description: Automatic Day Light Switch

Without manual operation With design, installation, reliable, small size, light weight Easy installation, long life advantages. Open during the day or night, during the day and switch off the evening off Widely used in street lighting, highways, factories, gardens, ports, airports, farms, parks, schools and other places. Turn off the light day and night without manual operation Do not install the control unit in a place that is darker during daytime or a place of direct light on the turn-up lamp

Used: street light, highway, factories, garden, gates, airports, farms, parks, schools, and other places. Also fits in solar lamps and lanterns, or cars, motorcycles, electric cars and other power supply is 220V lamps and lanterns or equipment

Features:

  • Working voltage: 220 (V)
  • Sensing range: 10 meters
  • Output form: relay
  • Color: white
  • Scope: garden / courtyard / street / district / school and so on
  • Load voltage: 10A
  • Load power: 2200W
  • Delayed off time: 0.1S
  • Frequency: 50-60HZ products
  • Net weight: 50G / only Sensing principle: light control
  • Size: 4.3 * 4.2 * 3.5CM
  • dark automatically turn on the lights automatically turn off the lights
  • Without manual operation Easy installation Long life advantages Small size and light weight Auto On Off Street Light Sensor Switch Automatic light Sensor Switch

Package Included:

  • 1 x Light Sensor Switch
]]> https://udvabony.com/product/automatic-day-light-switch-photo-electric/feed/ 0 MAX30102 Module MAX30102 Heart Rate Oximeter Sensor Module Pulse Oximeters Heart Rate Sensor Development Board With 7 Pin Cables Header https://udvabony.com/product/max30102-max-30102-heart-rate-oximeter-sensor/ https://udvabony.com/product/max30102-max-30102-heart-rate-oximeter-sensor/#respond Wed, 07 Sep 2022 18:44:22 +0000 https://udvabony.com/?post_type=product&p=143799 Description: MAX30102 Heart Rate Oximeter Sensor Arduino Module

MAX30102 Module MAX30102 Heart Rate Oximeter Sensor Module Pulse Oximeters Heart Rate Sensor Development Board With 7 Pin Cables Header

Heart Rate click carries Maxim’s MAX30100 integrated pulse oximetry and a heart-rate sensor. It’s an optical sensor that derives its readings from emitting two wavelengths of light from two LEDs – a red and an infrared one – then measuring the absorbance of pulsing blood through a photodetector. This particular LED color combination is optimized for reading the data through the tip of one’s finger.

The signal is processed by a low-noise analog signal processing unit and communicated to the target MCU through the mikroBUS I2C interface. Developers of end-user applications should note that the readings can be negatively impacted by excess motion and changes in temperature. Also, too much pressure can constrict capillary blood flow and therefore diminish the reliability of the data. A programmable INT pin is also available. The operates at the 3.3V power supply.

Specifications:

  • Optical sensor: IR and red LED combined with a photodetector
  • Measures absorbance of pulsing blood
  • I2C interface plus INT pin
  • 3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and
  • high-performance analog front
  • Ultra low power operation increases battery life for wearable devices
  • Advanced functionality improves measurement performance, high SNR provides robust motion artifact resilience integrated
  • ambient, light cancellation high sample rate capability fast data output capability
  • It is an integrated pulse oximetry and heart rate monitor sensor solution.

Features:

  • Working voltage: 1.8-5.5V
  • Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design
  • Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End
  • Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
  • Programmable Sample Rate and LED Current for Power Savings
  • Ultra-Low Shutdown Current (0.7µA, typ)

Applications:

  • Medical Monitoring Devices
  • Fitness Assistant Devices
  • Wearable Devices

Note: The module does not come with a berg pin connector.

Pin Configuration:

SN PINS DEFINITION OF PINS
1 VIN Input voltage (1.8V to 5.5V)
2 SCL IIC-SCL
3 SDA IIC-SDA
4 INT MAX30102INT
5 IRD MAX30102 IR_DRV
6 RD MAX30102 R_DRV
7 GND Ground

Package Includes:

  • 1 x MAX30102 MAX 30102 Heart Rate Oximeter Sensor Arduino Module Pulse Oximeters Development Board Sensor Module With 7 Pin Cables Connections Header
]]> https://udvabony.com/product/max30102-max-30102-heart-rate-oximeter-sensor/feed/ 0