A CLASS CD4010BE CD4010 IC DIP-16 Leads Pin Dual In Package

The CD4010UB and CD4010B devices are inverting and non-inverting hex buffers, respectively, and feature logic level conversion using only one supply voltage (VCC). The input-signal high level (VIH) can exceed the VCC supply voltage when these devices are used for logic-level conversions. These devices are intended for use as CMOS to DTL/TTL converters and can drive directly two DTL/TTL loads. (VCC = 5V, VOL £ 0.4V, and IOL ³ 3.3mA.)The CD4049UB and CD4050B are designated as replacements for CD4009UB and CD4010B, respectively. Because the CD4049UB and CD4050B require only one power supply, they are preferred over the CD4009UB and CD4010B and should be used in place of the CD4009UB and CD4010B in all inverter, current driver, or logic-level conversion applications. In these applications the CD4049UB and CD4050B are pin compatible with the CD4009UB and CD4010B respectively, and can be substituted for these devices in existing as well as in new designs. Terminal No. 16 is not connected internally on the CD4049UB or CD4050B, therefore, connection to this terminal is of no consequence to circuit operation. For applications not requiring high sink-current or voltage conversion, the CD4069UB Hex Inverter is recommended.

Features:

• High Voltage Type (20V Rating)
• Inverting Type
• High Sink Current for Driving 2 TTL Loads
• High-to-Low Level Logic Conversion
• 100% Tested for Quiescent Current at 20V
• Maximum Input Current of 1µA at 18V Over Full Package Temperature Range
• 5V 10V and 15V Parametric Ratings

Applications:

• CMOS to DTL/TTL Hex Converter
• CMOS Current “Sink” or “Source” Driver
• CMOS High-to-Low Logic Level Converter

Package Include:

• 1 x A CLASS CD4010BE CD4010 IC DIP-16 Leads Pin Dual In Package

A CLASS CD4049 CD4049BE CD-4049 4049 DIP-16 Pin Leads Dual In Package IC Breadboard Friendly IC

The CD4049UB and CD4050B devices are inverting and non-inverting hex buffers, respectively, and feature logic level conversion using only one supply voltage (VCC). The input-signal high level (VIH) can exceed the VCC supply voltage when these devices are used for logic-level conversions. These devices are intended for use as CMOS to DTL/TTL converters and can drive directly two DTL/TTL loads. (VCC = 5V, VOL £ 0.4V, and IOL ³ 3.3mA.)The CD4049UB and CD4050B are designated as replacements for CD4009UB and CD4010B, respectively. Because the CD4049UB and CD4050B require only one power supply, they are preferred over the CD4009UB and CD4010B and should be used in place of the CD4009UB and CD4010B in all inverter, current driver, or logic-level conversion applications. In these applications the CD4049UB and CD4050B are pin compatible with the CD4009UB and CD4010B respectively, and can be substituted for these devices in existing as well as in new designs. Terminal No. 16 is not connected internally on the CD4049UB or CD4050B, therefore, connection to this terminal is of no consequence to circuit operation. For applications not requiring high sink-current or voltage conversion, the CD4069UB Hex Inverter is recommended.

Features

• 1. High Voltage Type (20V Rating)
• 2. Inverting Type
• 3. High Sink Current for Driving 2 TTL Loads
• 4. High-to-Low Level Logic Conversion
• 5. 100% Tested for Quiescent Current at 20V
• 6. Maximum Input Current of 1µA at 18V Over Full Package Temperature Range
• 7. 5V, 10V and 15V Parametric Ratings

Applications

• 1. CMOS to DTL/TTL Hex Converter
• 2. CMOS Current “Sink” or “Source” Driver
• 3. CMOS High-to-Low Logic Level Converter

Package Include:

• 1 x CD4049 IC CD 4049 DIP 16 Pin IC

74126 SN74HC126N 74HC126 74LS126 Tri State Buffer Dual In Package DIP 14 Pin Leads IC

These are high speed CMOS QUAD BUS BUFFER (3-STATE) FABRICATED IN SILICON GATE C²MOS technology. They have the same high speed performance of LSTTL combined with true CMOS low power con-Sumption. These devices require the same 3-STATE control input G to be taken high to make the output go into the high impedance state. All inputs are equipped with protection circuits against static discharge and transient excess voltage.

Features:

• Four Independent Non-Inverting Buffer Gates
• Enabled Mode
• Fast Switching Times
• Operating Temperature up to 70oC
• Standard TTL Switching Voltages
• Supply Voltage: -0.5 to +7 V
•  DC Input Voltage: -0.5 to VCC + 0.5 V
•  DC Output Voltage: -0.5 to VCC + 0.5 V
•  DC Input Diode Current: ± 20 mA
•  DC Output Diode Current :± 20 mA
•  DC Output Source Sink Current Per Output Pin: ± 25 mA

Package Include:

• 1 x 74126 SN74HC126N 74HC126 74LS126  Tri State Buffer Dual In Package DIP 14 Pin IC

7407 SN74HC07N 74HC07 74LS07 DIP 14 Pin Leads IC Dual In Package 14Pin Leads IC Breadboard Friendly IC

Features:

• Six Independent Hex Buffer Gates
• Open Collector Outputs Require Pull-Up Resistors
• Open Collector Type Suitable for Indicator Lamps and Relays
• Input Clamping Diodes
• Standard TTL Switching Voltages
• Hex Buffer IC

Package Include:

• 1 x 7407 SN74HC07N 74HC07 74LS07 Buffer Hex Inline Dual In Package DIP 14 Pin IC

74540 SN74HC540N 74HC540 74LS540 DIP 20 Pin IC

Features:

• Identical to 74LS240 with Different Pinouts
• Hysteresis at Inputs to Improve Noise Margin
• PNP Inputs Reduce Loading
• 3-State Outputs Drive Bus Lines
• Input Clamp Diodes

Package Include:

• 1 x 74540 SN74HC540N 74HC540 74LS540 DIP 20 Pin IC

74541 SN74HC541N 74HC541 74LS541 DIP 20 Pin IC

Features:

• Identical to 74LS241 with Different Pinouts
• Hysteresis at Inputs to Improve Noise Margin
• PNP Inputs Reduce Loading
• 3-State Outputs Drive Bus Lines
• Input Clamp Diodes

Package Include:

• 1 x 74541 SN74HC541N 74HC541 74LS541 DIP 20 Pin IC

7438 SN74HC38N 74HC38 74LS38 DIP 14 Pin IC

Features:

• Four Independent NAND Buffer Gates
• Open Collector Outputs Require External Pull-Up Resistors
• Fast Switching Times
• Operating Temperature up to 70oC
• Standard TTL Switching Voltages

Package Include:

• 1 x 7438 SN74HC38N 74HC38 74LS38 DIP 14 Pin IC

74365 SN74HC365N 74HC365 74LS365 DIP 16 Pin IC

Features:

• Designed to Improve Performance and Density of Three-State Memory Address Drivers
• 3-State Outputs Drive Bus Lines
• Choice of True or Inverting Outputs
• Operating Temperature up to 70oC
• Standard TTL Switching Voltages

Package Include:

• 1 x 74365 SN74HC365N 74HC365 74LS365 DIP 16 Pin IC

MC14042B MC14042 14042 IC Buffer Quad Transparent DIP-16 16 Pin Dual In Line Package Chip Electrical Circuitry & Parts

The MC14042B Quad Transparent Latch is constructed with MOS P–channel and N–channel enhancement mode devices in a single monolithic structure. Each latch has a separate data input, but all four latches share a common clock. The clock polarity (high or low) used to strobe data through the latches can be reversed using the polarity input. Information present at the data input is transferred to outputs Q and Qduring the clock level which is determined by the polarity input.When the polarity input is in the logic “0” state, data is transferred during the low clock level, and when the polarity input is in the logic “1” state the transfer occurs during the high clock level.

Features:

• Buffered Data Inputs
• Common Clock
• Clock Polarity Control
• Q and QOutputs
• Double Diode Input Protection
• Supply Voltage Range = 3.0 Vdc to 1 8 Vdc
• Capable of Driving Two Low–power TTL Loads or One Low–power Schottky TTL Load Over the Rated Temperature Range

Specification:

• DC Supply Voltage Range:-0.5 to +18V
• Input or Output Voltage(DC or Transient):-0.5 to VDD+0.5V
• Input or Output Current(DC or Transient):±10mA
• Power Dissipation:500mW

Package Include:

• 1 x MC14042B 14042 Buffer Quad Transparent Electrical Circuitry & Parts

These buffers/line drivers are designed to improve both the performance and PC board density of TRI-STATE buffers/drivers employed as memory-address drivers, clock drivers, and bus-oriented transmitters/receivers. Featuring 400 mV of hysteresis at each low current PNP data line input, they provide improved noise rejection and high fanout outputs and can be used to drive terminated lines down to 133X.

Features:

•  PNP inputs reduce DC loading on bus lines
• Hysteresis at data inputs improves noise margins
• Typical IOL (sink current) 54LS 12 mA 74LS 24 mA
• Typical IOH (source current) 54LS b12 mA 74LS b15 mA
• Typical propagation delay times Inverting 10.5 ns Noninverting 12 ns
• Typical enable/disable time 18 ns
• Typical power dissipation (enabled) Inverting 130 mW Noninverting 135 mW
• Maximum Supply Voltage:5.25V
• Maximum Operating Temperature:70°C

Package Include:

• 1 x 74244 SN74HC244N 74HC244 74LS244 DIP 20 Pin IC