Description: 1.25mm 10-Pin Wired Header W/ Plug
The connector with wires can be easily modified to suit the wire configuration and polarity of your device. To do so, simply lift up the plastic clamp with a pin and pull the wires out of the female connector. Then you may alter the wires as you wish, and clip the clamp back on.
- Futaba, FlyDream, FrSky, Walkera and the new Hobby King Micro (DSM2) 2.4G systems.
- HobbyKing 1.7 and 2.2g Servos
- FPV camera, Run Cam, Micro camera, Futaba receivers and the micro servos.
- RC Hobby Battery connector, RC Receivers, RC transmitters.
- Quadcopter Electrical Connector
- Sub GHz digital radio modem
- HS1177 family FPV camera
- Educational projects and general purpose
- These connectors wire the ends are pre stripped and tinned ready for soldering.
- 1.25mm connector works with RC electronics.
- 1.25mm pitch connectors commonly found on laptop and VGA card fan.
|Application||Wire to Board|
|Gender||Male Header, Female Housing|
|PC Board Mounting Direction||Top Entry|
|Number of Rows||1|
|End of wire Material||Solder bare wire|
|Voltage rating||125V DC/AC|
|Current rating||1.0A AC, DC|
|Withstand voltage||500 VAC/minute (effective value)|
|Working Temperature||-25°C to +85°C|
|Insulation resistance||≥ 1000M Ω|
|Contact resistance||≤ 0.02 Ω|
|Applicable PC board thickness||0.8 to 1.6mm|
1 x 1.25mm 10-Pin Wired Header W/ Plug