DC 12V Solenoid Water Valves 1/2″ Inch Diameter DC 12V Solenoid Water Pressure Valve For Engineering Projects DIY

Description: DC 12V Solenoid Water Valve 1/2″ Inch Diameter DC 12V Solenoid Water Pressure Valve For Engineering Projects DIY

DC 12V Solenoid Water Valve 1/2″ Inch Diameter DC 12V Solenoid Water Pressure Valve For Engineering Projects DIY

12V of our plastic valve line is a two-way, direct acting valve with a normally closed operating position. This means that there are two ports in which media flows and the valve will open when energized to allow media to pass through. Taking the energy away from the valve will close it and stop the flow. It works across various media such as water, air, oil or other low viscosity fluids. This valve is uni-directional and will control flow in a single direction.

The port size is 1/2” inch NPT male threaded. It can withstand pressure up to 115 psi (8 bar) and temperatures as low as 0°C and as high as 50°C. The seal material is EPDM Rubber. This valve is capable of flowing 6.5 Gallons per minute at the max rated PSI.

This specific plastic valve has a 120V DCcoil with a voltage range that is -+ 10%. The coil head can easily be connected with your own terminal connectors or directly soldered. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.

The DC  12V solenoid controlled fluid valve. The valve is normally closed (NC) and opens when transmitting voltage to it. In order to function normally, a minimum fluid pressure of 0.02Mpa (3 PSI) is required. The valve is directionally sensitive, which means that liquid can only flow from the input to the output, not the opposite. Simply connect a fluid source to the 1/2″ threaded inlet and it will interrupt the flow until DC 12V is applied to the fast-on connectors on the solenoid.

Specification:

• Rated Operating Voltage: DC  12V
• Rated Current: 1A
• Operation Mode: NC (Normally Closed)
• Pressure: 0.02 – 0.8MPa
• Max fluid temperature: 100°C
• Port size: 1/2” Inch

Features:

• Compact and convenient.
• Easily installed and serviced
• Precise and reliable.
• The installation direction can be arbitrary Angle
• Pressure-regulating valve (steady flow valve) function similar to the water flow switch
• Not only can it provide a steady flow, but it also prevents the dry burning.
• Suitable for fluids like water, oil, air.

Note: This is not a gravity-feed solenoid. This means that you will need enough water pressure to fully open the valve.

Package Include:

• 1 x DC 12V Solenoid Water Valve 1/2″ Inch Diameter DC 12V Solenoid Water Pressure Valve For Engineering Projects DIY