Description: ATK-SIM800C GSM/GPRS Module
The Shield is based on GPRS SIM900 module SIMCOM and compatible with Arduino and its clones. GPRS Shield provides you a way to communicate using the GSM cellular network. The shield allows for SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced commands at). The shield also has 12 GPIOs 2 PWMs and ADC SIM900 module (they are all 2V8 logic) present onboard.
Serial baud rate: 1200~460800bps
Working frequency band: 850/900/1800/1900M
Control mode: AT instruction (TS27.007 3GPP)
GPRS: PPP connection, embedded TCP/IP protocol
Basic functions: dial / answer / SMS /GPRS communication
Extensions: MMS /DTMF/TTS/ Bluetooth
Power supply range: DC5~24V (2A)
Working temperature: -40 ~ 85degrees C
Module size: 62mmX52.5mm
Quad-band 850/900/1800/1900 MHz-would work on GSM networks in all countries worldwide.
GPRS multi-slot class 10/8
GPRS Class B mobile station
Compatible with GSM phase 2/2 +
Class 4 (2 W (at) 850/900 mhz)
Class 1 (1 W (at) 1800/1900 mhz)
Control via standard at-command commands: GSM 07.07 and 07.05 enhanced commands: SIMCom commands at.
Short Message Service-so you can send small amounts of data over the network (ASCII or raw hexadecimal).
Embedded tcp / udp-stack allows you to upload data to a web server.
Serial port selectable.
SPEAKER and headphones
Low power consumption-1.5mA (sleep mode)
Industrial temperature range -40 ° C to + 85 ° C
1 x ATK-SIM800C GSM/GPRS Module