DHT11 DHT-11 DC 3.3V-5V 3 Pin Temperature And Relative Humidity Sensor Module With Matching Doupont Cable Digital Temperature Humidity Sensor Module For Arduino Raspberry Pi DIY Kit
DHT11 Digital Temperature Humidity Sensor Module Temperature Humidity Sensor 3.3V-5V Humidity Measure Range 20%-95% Temperature Measure Range 0-50℃ Celsius with Dupont Wires
The DHT11 Temperature and Humidity Sensor is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and outputs a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
DHT11 digital temperature and humidity sensor is a temperature and humidity composite sensor with calibrated digital signal output. It uses a dedicated digital module acquisition technology for temperature and humidity sensing technology to ensure that the product has extremely high reliability and excellent long-term stability. The sensor includes a resistive humidity sensing element and an NTC temperature measuring element, and is connected with a high-performance 8-bit microcontroller. Therefore, the product has the advantages of excellent quality, ultra-fast response, strong anti-interference ability, and extremely high cost performance.
- DHT11 digital temperature and humidity sensor is a calibrated digital signal output temperature and humidity combined sensor, which utilizes exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability.
- The DHT sensors are made of two parts, a capacitive humidity sensor and a thermistor.And with a high-performance 8-bit microcontroller connected.
- Small size & low consumption & long transmission distance enable DHT11 to be suited in all kinds of harsh application occasions. Single-row packaged with four pins, making the connection very convenient.
- The sensor is a calibrated temperature and humidity combined sensor and doesn’t require extra components so you can both measure relative humidity and temperature.
- The digital signal is fairly easy to read using any microcontroller.
- Can detect surrounding environment of the humidity and temperature
- DHT11 sensor adopts
- Humidity measurement range: 20%-95%, humidity measurement error: +-5%
- Temperature measurement range: 0 -50 ;measurement error: +-2 degrees
- Working voltage 3.3 V-5 V
- Output form: digital output
- Has fixed bolt hole and easy installation
- 100% brand new and high quality
- DHT11 sensor adopts
- The module can detect surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability output form digital output has fixed bolt hole and easy installation
- Size: 28 x 12 x 10mm
- Main chip:DHT11 temperature and humidity sensor
- Working voltage: DC 5 V
- Humidity measurement range: 20-90% RH
- Humidity measurement accuracy: + / – 5% RH
- Temperature measuring accuracy: plus or minus 2 ℃
- Temperature measurement range: 0-60 ℃
- Digital signal output
- 1.VCC:External 3.3 V-5 V
- 2.GND:External GND
- 3.DO:Small board switch digital output interface, connect the microcontroller IO port
- Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
- 1 x DHT11Temperature and Humidity sensor Module