Description: Remote Serial Esp8266 Esp-03 WiFi Module Transceiver Receiver Wireless Control Module For Arduino Uno R3
ESP8266 ESP-03 Remote Serial WiFi Module Transceiver Receiver Wireless Control Module ESP 8266 ESP 03 For Arduino Uno R3 Electronics Circuitry & Parts
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
Specifications:
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 1.1/2.0, SPI, UART
- STBC, 1 * 1 MIMO, 2 * 1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
Features:
- SDIO 2.0, SPI, UART
- 32-pin QFN package
- Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
- Integrated RISC processor, on-chip memory and external memory interfaces
- Integrated /baseband processors
- Quality of Service management
- I2S interface for high fidelity audio applications
- On-chip low-dropout linear regulators for all internal supplies
- Proprietary spurious-free clock generation architecture
- Integrated WEP, TKIP, AES, and WAPI engines
Applications:
- Smart power plugs
- Home automation
- Mesh network
- Industrial wireless control
- Baby monitors
- IP Cameras
- Sensor networks
- Wearable electronics
- Wi-Fi location-aware devices
- Security ID tags
- Wi-Fi position system beacons
Warning:
- This module requires a 3.3 volt supply for VCC, and 3.3V logic. It is not 5V tolant. Connect RX or TX on 5V Ard will
destroy this module. You must use a logic level converter, or a 3.3V Ard - The 3.3V supply on the Ard Uno has inadequate current capabilit to power this module. You must provide a separate,
higher 3.3V supply(about 300mA or better) - The ESP8225 module is very new on the market and support and documentation for it is currently very limited.
Package Include:
- 1 x Remote Serial Esp8266 Esp-03 WiFi Module Transceiver Receiver Wireless Control Module For Arduino Uno R3
Reviews
There are no reviews yet.