Description: LM35-TO-92 Temperature Sensor
LM35DZ LM35 Temperature Sensor IC LM 35 Precision Centigrade Temperature Sensors TO-92 Package IC
The LM35 series are precision integrated-circuit temperature devices with an output voltage linearly-proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full −55°C to 150°C temperature range. Lower cost is assured by trimming and calibration at the wafer level. The low-output impedance, linear output, and precise inherent calibration of the LM35 device makes interfacing to readout or control circuitry especially easy. The device is used with single power supplies, or with plus and minus supplies. As the LM35 device draws only 60 µA from the supply, it has very low self-heating of less than 0.1°C in still air. The LM35 device is rated to operate over a −55°C to 150°C temperature range, while the LM35C device is rated for a −40°C to 110°C range (−10° with improved accuracy). The LM35-series devices are available packaged in hermetic TO transistor packages, while the LM35C, LM35CA, and LM35D devices are available in the plastic TO-92 transistor package. The LM35D device is available in an 8-lead surface-mount small-outline package and a plastic TO-220 package.
The lm35 temperature sensor circuit:
As such no extra components required to interface LM35 to ADC as the output of LM35 is linear with 10mv/degree scale. any 10 or 12 bit ADC interfaced directly with lm35. But if you are using an 8-bit ADC like ADC0808 or ADC0804 an amplifier section will be useful if you require measuring 1°C change.
LM35 directly connected to Arduino. The output of LM35 temperature goes to comparator circuit and used for over temperature indication or by using a simple relay, used as a temperature controller.
- Calibrated Directly in Celsius (Centigrade)
- Linear + 10-mV/°C Scale Factor
- 0.5°C Ensured Accuracy (at 25°C)
- Rated for Full −55°C to 150°C Range
- Suitable for Remote Applications
- Low-Cost Due to Wafer-Level Trimming
- Operates From 4 V to 30 V
- Less Than 60-µA Current Drain
- Low Self-Heating, 0.08°C in Still Air
- Non-Linearity Only ±¼°C Typical
- Low-Impedance Output, 0.1 Ω for 1-mA Load
- Supply voltage: 4 V to 30 V
- The scale is calibrated to degrees of Celsius
- Linear scale: 10,0 mV/°C
- Accuracy 0.5 °C
- Measuring range: from -55 °C to 150 °C
- Current of drain is below 60 mA
- 1 x LM35DZ LM35 Temperature Sensor IC LM 35 Precision Centigrade Temperature Sensors TO-92 Package IC