Description: PIC16F883
PIC16F883 Microcontrollers IC 16F883 IC MCU DIP-28 28 Pin Leads Dual In Line Package Chip PIC16F883 IC
PIC16F883 PIC-16F883 PIC 16F883 Microcontrollers IC 8-Bit 20MHz 7KB Flash Microchip MCU DIP-28 28 Pin Dual In Line Package Chip Electrical Circuitry & Parts
his powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip’s powerful PIC® architecture into a 28 pin package. The PIC16F883 features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances or consumer applications.
The PIC16F883 from Microchip Technology is a family of low-cost, high-performance, 8-bit, fully static, Flash-based CMOS microcontrollers. It employs a RISC architecture with only 35 single-word/single-cycle instructions. All instructions are single cycle except for program branches which take two cycles. The PIC16F883 delivers performance an order of magnitude higher than its competitors in the same price category. The easy-to-use and easy-to-remember instruction set reduces development time significantly.
The PIC16F883 products are equipped with special features that reduce system cost and power requirements. There are 5 oscillator configurations to choose from, including the high accuracy internal oscillator, power-saving LP (Low Power) oscillator and cost saving RC oscillator. Power saving Sleep mode, Watchdog Timer and code protection features improve system cost, power and reliability.
Specifications:
- Factory calibrated to ±1%
- Software selectable frequency range of 8 MHz to 32 kHz
- Software tunable
- Two-Speed Start-Up mode
- Fail-safe clock monitoring for critical applications
- Clock mode switching during operation for low-power operation
- Power-Saving Sleep mode
- Power-on Reset (POR)
- Selectable Brown-out Reset (BOR) voltage
- Extended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
- In-Circuit Serial Programming™ (ICSP™) via two pins
- In-Circuit Debug (ICD) via two pins
- 100,000 erase/write cycle enhanced Flash program memory, typical
- 1,000,000 erase/write cycle data EEPROM memory, typical
- Data EEPROM retention > 40 years
- Self-reprogrammable under software control
- Programmable code protection
- 1 input only pin
- 25 I/O
- High sink/source current 25 mA
- Interrupt-on-pin change option
- TMR0: 8-bit timer/counter with 8-bit prescaler
- TMR1 enhanced: 16-bit timer/counter with prescaler, External Gate Input mode and dedicated low-power 32 kHz oscillator
- TMR2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
- Capture/Compare/PWM (CCP) module
- Enhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steering
- Master Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability
- Supports RS-485, RS-232 and LIN compatibility
- Auto-Baud Detect
- Auto-wake-up on Start bit
- Ultra Low-Power Wake-up (ULPWU)
- 10-bit 11 channel Analog-to-Digital (A/D) Converter
- Programmable on-chip Voltage Reference (CVREF) module (% of VDD)
- Fixed 0.6 Vref
- Comparator inputs and outputs externally accessible
- SR Latch mode
High-Performance RISC CPU
- Only 35 single-word instructions to learn
- All instructions are single cycle except for program branches which are two-cycle
- 8-level deep hardware stack
- Direct, Indirect and Relative Addressing modes for data and instructions
- Operating speed: up to 20 MHz clock speed, 200 ns instruction cycle time
- 4K x 14 words of Flash Program Memory
- 256 x 8 bytes of data memory (RAM)
- 256 x 8 bytes of EEPROM data memory
- 24 I/O pins
Special Microcontroller Features:
- Power-on Reset (POR)
- Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
- Programmable Code Protection
- Power-Saving Sleep mode
- In-Circuit Serial Programming™ (ICSP™)
- Selectable oscillator options:
- Precision internal oscillator – factory calibrated to within 1%, software selectable range between 8MHz and 31kHz
- RC: Low-cost RC oscillator
- XT: Standard crystal/resonator
- HS: High-speed crystal/resonator
Package Include:
- 1 x PIC16F883
Reviews
There are no reviews yet.