High Hardness Crimping Pliers Terminal Tool For Dupont PH2.0 AMG 28-20 JST European Ratchet Terminal Pliers 7.5 Inch Professional Pin Compression Ratcheting Pliers
The ratchet crimping component is made of special steel. Electric discharge machining wire cuts jaws with perfect polishing. Designed according to human factor engineering, it can save 50% energy when crimping. Proper set of crimping die and integral lock with self-release mechanism ensure high-quality crimping effect after repeated crimping.
Specification:
- Condition: 100% Brand New
- Hello! Welcome to our store!
- Quality is the first with best service. customers all are our friends.
- 100% Brand New and High Quality
- Material: stainless steel
- Color: Blue + Black
- brand new
- Material: 65# + 45# steel
- Size: about 195*57mm.
- Crimping range: 0.08-0.5mm & sup; 2; AWG28-20
- Compatible with Dupont, PH2.0, KF2510, AMG28-20, Servo, XH2.54/3.96, PX, KK254, JST, Molex, D-SUB Terminal
Attribute:
- Cord discharge machining, cutting jaws, perfect polishing.
- Ergonomic design, energy saving
- Precise crimping die sets and integral lock self-release mechanism provide crimping effect after crimping repeatedly.
- high strength and hardness
- easy to use
- durable to use.
- Compatible with Dupont, PH2.0, KF2510, AMG28-20, Servo, XH2.54/3.96, PX, KK254, JST, Molex, D-SUB Terminal.
How to use:
- 1.If on a roll, don’t cut the pins off, leave them on until the wire is crimped. Prepare the wire by stripping about 1/8″ (3 mm) of insulation from the end.
- Place the wire in the crimp pin, lining it up so that the stripped portion lies between the inner set of tabs on the crimp pin, while insulated wire lies between the outer set of tabs.
- 2.If your crimp pins are too short for this method. see the bottom of these instructions for an alternative.
- Place the wire and crimp pin on the appropriate tooth of the tool’s die, making sure that the insulated end is on the raised and wider half of the tooth.
- The tabs should point toward the cavity on the other side of the die so that the tool bends them inward around the wire when it closes.
- 3.Close the jaws of the tool slowly and completely until they release.
- The tabs on a properly crimped pin should form one barrel around the wire conductors and another barrel for strain relief around the wire insulation.
- 4.Alternatively, if the crimp pins are too short for this method (or if not on a roll), then snap the pin from the holding strip completely.
- Insert into the correct slot in the crimping tool and ratchet the crimp tool to just hold in place. Insert the wire from the other end and crimp.
Notice:
- 1. Due to the light and screen difference, the item’s color may be slightly different from the pictures.
- 2. Please allow 0.5-1cm differences due to manual measurement.
- 3. Thank you for your kindly understanding.
Package Included:
- 1 x High Hardness Crimping Pliers Terminal Tool For Dupont PH2.0 AMG 28-20 JST European Ratchet Terminal Pliers 7.5 Inch Professional Pin Compression Ratcheting Pliers
Reviews
There are no reviews yet.