Description: Stepper Motor Driver TB6560 3 Axis For CNC Engraving Machine Mach 3 Axis
3 Axis TB6560 Stepper Motor Driver Controller DC 10V-35V 3A TB6560 Stepper Motor Driver 3A 35VDC Motor Driver Adapters For CNC Machine 3D Printer DIY
Features:
- 1.increase monolithic control function, the X Y Z axis speed can be set independently.
- 2.two running mode, can wire the potentiometer to control the axis speed.
- 3.can manual control motor by direct external button, real-time numerical control display.
- 4.the isolation power supply module, just a group of power input can run.
- 5.can set screw stroke of step distance , support offline JOG running and display.
- 6.add analog 0-10 V output, use inverter to regulate the spindle speed.
- 7.add 15 pins multi-function interface, which can be a variety of signal input control docking.
- 8.add the whole bridge free-wheeling diode for every axis on the bottom of the board, ensure chip long durability.
- 9.add signal buffer chip, to enlarge the external signal, increase the accuracy of the pulse.
- 10.E shape aluminum heat sink on the bottom of the board to guarantee full load operation 24 hours, low temperature.
Specifications:
- 1: Inductive DC to DC buck module, the computer side and then use the power isolation module design, just a set of power input to run (not in the computer USB side to take power, simplify the line, reduce the interference source)
- 2: increase the external signal input optical lotus isolation. All use of optical lotus isolation input, you can use the board internal voltage optical coupling isolation, you can completely use the external voltage directly input isolation signal, the input voltage of 5V-30V (greater than 5V external voltage Need a string of resistance, according to the voltage close to the switch to choose the use of resistance)
- 3: increase the analog 0-10V output, combined with the spindle control inverter MACH3 software speed.
- 4: Add a set of relay selection output (can output two sets of relays at the same time, control two different devices, to achieve load isolation, relay 1 for the P1 pin set, the relay 2 for the P16 pin set)
- 5: Added 15-pin multi-function interface, can be a variety of signal docking input control (can be directly with the handle or Wei Hong card signal input).
- 6: join the signal buffer chip, amplify the external signal, increasing the accuracy of the pulse.
- 7: Large bottom E-shaped aluminum heat sink to ensure full load operation 24 hours, the temperature is very low (no need to add a fan or other cooling device).
The advantages of the TB6560AHQ chip:
- The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed.
- Flush type low heat: The area of the chip can support itself to cool when the current is low
- Supports a lot of stepper motors
- The advantages in the high-speed running condition
Note:
- When you want to use the handle kit to control, MACH3 itself in reverse operation, whatever the signal can change the motor’s turn direction, so buying external pulse handle is not realistic, can’t control the machine by the software and manual at same time, but our board succeed to solve the problem, can control and switch between both of the software and manual!
Package Include:
- 1 x Stepper Motor Driver TB6560 3 Axis For CNC Engraving Machine Mach 3 Axis
Reviews
There are no reviews yet.