It is widely used in the adhesive manufacturing and maintenance of plastic panels, fuel tanks, bumpers, reflectors, industrial oil tanks, transformers, radiators, lamps, electrical housings, etc. of automobiles and motorcycles. It can also be used in industrial products such as elevators and motors. Bonding assembly.

4 Mins Epoxy Steel :
NS 4 MINUTES EPOXY STEEL is a steel filled fast setting non shrinking gray colour adhesives It offers good gap-filling capabilities and slumping characteristics I will chemically bond steel, brass copper bronze iron plastic, wood concrete and ceramics Withstands high temperatures and is pressure resistant Use to repair worn valve seats, cracked housings, coppers and cylinder heads gas tank leaks radiator leaks, torn keyways, stripped threads worn pulleys, loose screws, etc.

Directions:

• 1. Both surfaces to be bonded should be clean dry and free from grease.
• 2. Pierce tube seal with reverse end of cap Squeeze out equal amounts of Resin (A) and Hardener (B). Mix thoroughly
• 3. Apply to surface being repaired and remove excess material immediately Set in 4 minutes and attains its full strength after 24 hours.
• 4. Replace cap immediately after use, Store in a cool dry place. Made in PRC

Caution!
Avoid breathing invapor Uncured adhesive may cause irritation. In case of contact with eyes flush with water and call physician. In case of contact with skin wipe off with cloth and flush with water Use with adequate ventilation

Features:

• 1. Excellent storage stability, a wide range of bonding materials, and can be widely used for self-adhesion and mutual adhesion of metals, ceramics, plastics, and wood;
• 2. The surface to be bonded does not require strict degreasing treatment, making bonding more convenient;
• 3. Fast curing speed, 3-5 minutes in summer and 5-10 minutes in winter;
• 4. After curing, the adhesive layer has good toughness, is not easy to break, and is resistant to aging and oil stains.
• 5. Fast Se Steel Filled Gray Epoxy
• 6. High Mechanical Strength
• 7. Chemical & Heat Resistance
• 8. Non Shrink & Waterproof

Specifications:

• Maximum Filling Gap: 4mm
• Density: 1.03g/cm²
• Surface Drying Time: 3~8 minutes for initial curing, 30 minutes for use intensity
• Working Temperature: -60~120°C
• Viscosity: A 8-10PA.s, B 4-6PA.s
• Tensile Strength: 18-20Mpa
• Impact Strength: 1.05-1.20J/cm²
• Shear strength: ≥20Mpa
• Full fixing time: 24h

Applications:

Suitable for bonding metal, wood, plastic, china, ceramics, tools and glassware. Not suitable for bonding of polyethylene, polypropylene, PTFE and other flexible materials.

Package Include:

• 1 x  Adhesive 4 Mins Epoxy Steel Epoxy