75176 SN74HC176N 74LS176 DIP 4 Pin IC DIP4 Package

Description: 75176 SN74HC176N DIP 4 Pin IC

The SN75176A differential bus transceiver is a monolithic integrated circuit designed for bidirectional data communication on multipoint bus-transmission lines. It is designed for balanced transmission lines and meets ANSI Standard EIA/TIA-422-B and ITU Recommendation V.11.The SN75176A combines a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables,respectively, that can be externally connected together to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus whenever the driver is disabled or VCC = 0. These ports feature wide positive and negative common-mode voltage ranges making the device suitable for party-line applications.The driver is designed to handle loads up to 60 mA of sink or source current. The driver features positive- and negative-current limiting and thermal shutdown for protection from line fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The receiver features a minimum input impedance of 12 kW, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV. The SN75176A can be used in transmission-line applications employing the SN75172 and SN75174 quadruple differential line drivers and SN75173 and SN75175 quadruple differential line receivers.The SN75176A is characterized for operation from 0°C to 70°C.

Specification:

• Supply voltage(Maximum), VCC: 7 V
• Supply voltage(Recommended), VCC: 5.25 V
• Voltage range at any bus terminal :–10 V to 15 V
• Enable input voltage, VI: 5.5 V
• Operating free-air temperature range, TA: 0°C to 70°C
• Storage temperature range, Tstg : – 65°C to 150°C
• Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: 260°C

Package Include:

• 1 x 75176 SN74HC176N DIP 4 Pin IC