CD4050BE CD4050 CD-4050 4050 DIP-16 Pin Dual In Package Hex Buffer Converter Non-inverting Buffer IC Breadboard Friendly IC

Description: CD4050 IC CD 4050 DIP 16 Pin IC

CD4050BE CD4050 CD-4050 4050 DIP-16 Pin Dual In Package Hex Buffer Converter Non-inverting Buffer IC Breadboard Friendly IC

CD4050 is a hex non – inverting buffer IC belonging to the CD4000 IC series. These devices feature logic level conversion using only one supply voltage (VDD). The input signal high level (VIH) can exceed the VDD supply voltage when these devices are used for logic level conversions. These devices are intended for use as hex buffers, CMOS to DTL/ TTL converters, or as CMOS current drivers. The IC has a wide array of working conditions, operating voltages, and interfaces directly with CMOS, NMOS, and TTL devices.

What is a Non-inverting Buffer?

A non inverting buffer is a basic logic gate that passes its input, unchanged, to its output. Its behavior is the opposite of a NOT gate. The main purpose of a buffer is to regenerate the input, usually using a strong high and a strong low. A non inverting buffer has one input and one output; its output is always equal to its input. Buffers are also used to increase the propagation delay of circuits by driving the large capacitive loads.

CD4050 Key Features

• Wide supply voltage range: 3.0V to 15V
• Direct drive to 2 TTL loads at 5.0V over full temperature range
• High source and sink current capability
• Special input protection permits input voltages greater than VDD

CD4050 Pinout

Application

• As CMOS hex inverter/buffer
• CMOS to DTL/TTL hex converter
• As CMOS current “sink” or “source” driver
• CMOS HIGH-to-LOW logic level converter

Package Include:

• 1 x CD4050 IC CD 4050 DIP 16 Pin IC