MECHANIC UVH900 900 10cc Green UV Curing Solder Mask Ink Solder Paste Flux Green UV Light Curing BGA PCB Paint Prevent Solder Mask Ink Welding Oil UV Light-Cured Solder Mask

Description: Mechanic Green UV Curing Solder Mask Ink UVH900 Paint Welding Oil Prevent Corrosive Arcing for Phone PCB BGA 

MECHANIC UVH900 900 10cc Green UV Curing Solder Mask Ink Solder Paste Flux Green UV Light Curing BGA PCB Paint Prevent Solder Mask Ink Welding Oil UV Light-Cured Solder Mask

Solder mask insulates against electrical connections and does not allow solder to stick to it. It is why you can solder to a solder pad, but not to the board itself. It does not conduct electricity and is heat resistant. Mechanic LY-UVH900 is used to Insulate jumpers, Cover exposed ground around BGA chipset pads, Cover leads of components you do not want to touch a jumper. Apply a small amount using a toothpick, then cure in with UV light. Dispensing needle is included. Note that plunger is not included. Screws driver or similar tool can be used instead of a plunger.

Features:

• High Quality
• 10ml UV green paint
• Insulates printed circuit board against shorting and arcing.
• This paint is used to protect PCB traces from corrosion, moisture.
• It is also used for repairing PCB after soldering, rework.

Specification:

• Syringe Length: Approx. 10 cm
• Material: Paint
• Capacity: 10 cc
• color : Green
• Paste Type: LVH900-LY/GY

Applications:

• Apply paint on your PCB
• Spread it on the PCB with covering the transparent mask film.
• Expose it under UV light ( or sun ) for a few minutes.
• Wash away the extra paint by gasoline or oil base solvent.
• Masking Paste

Package Includes: 

• 1 x Mechanic Green UV Curing Solder Mask Ink UVH900 Paint Welding Oil Prevent Corrosive Arcing for Phone PCB BGA Motherboard Welding Soldering Tools