MAX490 MAX 490 MAX490CPD MAX490EPD Transceiver IC DIP-8 8 Pin Dual In Line Package Chip Electrical Circuitry & Parts

Description: MAX490 Transceiver

MAX490 MAX 490 MAX490CPD MAX490EPD Transceiver IC DIP-8 8 Pin Dual In Line Package Chip Electrical Circuitry & Parts

These are low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The driver slew rate of the  MAX490 is not limited, allowing them to transmit up to 2.5Mbps.These transceivers draw between 120μA and 500μA of supply current when unloaded or fully loaded with disabled drivers. All parts operate from a single 5V supply.Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. Full-duplex communications are obtained using the this IC.

Specification:

• Supply Voltage :12V
• Control Input Voltage :-0.5V to (VCC + 0.5V)
• Driver Input Voltage :-0.5V to (VCC + 0.5V)
• Driver Output Voltage (A, B):-8V to +12.5V
• Receiver Input Voltage (A, B):-8V to +12.5V
• Data Rate:2.5 MBPS
• Number of Transmitters on BUS:32

Package Include:

• 1 x MAX490 MAX 490 MAX490CPD MAX490EPD Transceiver IC DIP-8 8 Pin Dual In Line Package Chip Electrical Circuitry & Parts