SS9015 S9015 PNP 20V 500mA Transistor TO-92 Package Transistor NPN Small Signal Transistor 3 Pin Leads For Audio Amplifiers

Description: SS9015 S9015 PNP 20V 500mA Transistor TO-92 Package 

SS9015 S9015 PNP 20V 500mA Transistor TO-92 Package Transistor pnp Small Signal Transistor 3 Pin Leads For Audio Amplifiers

SS9015 is a well-known PNP silicon BJT transistor. This transistor is mainly designed for low gain signals amplification. Normally when a low gain signal is amplified to high gain then the noise with the signal is also get amplified but this transistor possess low noise feature which filters noise from the amplified signal and hence you will get a low noise and high gain signal at the output. The max collector dissipation of the transistor is 400mW that is enough to drive a small 2 to 3 inch 4Ohms or 8Ohms speaker directly if any small few milliwatt input signal is provided. Other than these uses it can also be used as a switch to drive loads under -100mA. The transition frequency is 150MHz due which it can also be used in RF circuits under 150 MHz frequency spectrum.

• Package Type: TO-92
• Transistor Type: PNP
• Max Collector Current(I_C):  –100mA
• Max Collector-Emitter Voltage (V_CE):  –45V
• Max Collector-Base Voltage (V_CB):  –50V
• Max Emitter-Base Voltage (VEBO):  –5V
• Max Collector Dissipation (Pc): 400 miliWatt
• Max Transition Frequency (fT): 150 MHz
• Minimum & Maximum DC Current Gain (h_FE): 60 – 1000
• Max Storage & Operating temperature Should Be: -55 to +150 Centigrade

PNP Complementary:

PNP Complementary of SS9015

Replacement and Equivalent:

Alternative transistors for 2SC9013 are S9013, S8050, 2N2222, BC337, BC338, output pins of some equivalents are different please see pinout details of the transistor you are willing to replace.

Where We Can Use it & How to Use:

SS9015 can be used for variety of applications like audio preamplification, audio amplification, amplifying any low gain signals to high gain, etc. Moreover it can also be used as a switch to drive relays, LEDs, high power transistors etc. This transistor can be used or wired same like any other BJT transistor.

 Applications:

• Audio Preamplifiers
• Audio Amplification Stages
• Signal Amplifier
• Hearing Aids
• Sensor Circuits
• Switching loads under 100mA
• Darlington Pairs

How to Safely Long Run in a Circuit:

For safety and long term performance the user should not operate the transistor above 20V, a suitable current limiting resistor for base of the transistor is essential, always place the pins of the transistor right in the circuit if connected wrong then check the transistor before placing it again in the circuit, do not connect or operate load more than 500mA with this transistor and always operate and store this transistor in a temperature range above -55 centigrade and below +150 centigrade.

Package Include:

• 1 x SS9015 S9015 PNP 20V 500mA Transistor TO-92 Package Transistor NPN Small Signal Transistor 3 Pin Leads For Audio Amplifiers