A CLASS TIP32C Transistor TIP32 Transistor TIP32C IC TIP32C MOSFET PNP Transistor 100V 3A 40W 3 Pin Leads TO-220 Transistor IC

Description: TIP32C PNP Power Transistor

A CLASS TIP32C Transistor TIP32 Transistor TIP32C IC TIP32C MOSFET PNP Transistor 100V 3A 40W 3 Pin Leads TO-220 Transistor IC

TIP32C is another must have transistor in your electronics lab. It is a low cost power transistor that can serve many general purpose switching and amplification applications. The maximum load this transistor can handle is 3A and the maximum peak current it can handle is 5A, the peak current is the current the transistor cannot handle continuously but in pulses.  The maximum load voltage limit is 100V. Other than that it can also serve as an amplifier, the max collector dissipation is 40W which also makes this transistor ideal to use in audio amplifier stages and also as separate amplifier to drive speaker. The metal can tab or the heatsink connection tab is also connected with the collector of the transistor.

Technical Specifications:

• Package Type: TO-220
• Transistor Type: PNP
• Max Collector Current(I_C): –3A or -3000mA
• Max Collector-Emitter Voltage (V_CE): –100V
• Max Collector-Base Voltage (V_CB): –100V
• Max Emitter-Base Voltage (VEBO): –5V
• Max Collector Dissipation (Pc): 40W
• Max Transition Frequency (fT): 3 MHz
• Minimum & Maximum DC Current Gain (h_FE): 10 – 50
• Max Storage & Operating temperature Should Be: -65 to +150 Centigrade

Features

• Medium-power PNP Transistor
• DC Current Gain (hFE) 10 to 50
• Continuous Collector current (IC) is 3A
• Collector-Emitter voltage (VCE) is 100 V
• Collector-Base voltage (VCB) is 100V
• Emitter Base Voltage (VBE) is 5V
• Available in To-220 Package
• Low saturation voltage
• Simple drive requirements
• High safe operating area
• For low distortion complementary designs
• Easy to carry and handle

NPN Complementary

NPN Complementary of TIP32C is TIP31C

Replacement and Equivalent

TIP32C transistor nearest possible equivalents are CJF32C, TIP32D, BD582, BD592, BDT32C 2N6475 2N6476, 2SB1016, MJE30C, MJE32C, MJE5195, NSP582, NSP5195, RCA30C, RCA32C, TIP62A, TIP62B, TIP62C, 2SB761B, 2SB762B, 2SB860, 2SB869, 2SB945, BD242C, BD540C, BD954, ECG292.

Additionally if the load you are driving is under 40V or 80V then you can also use exact match transistors which are TIP32A, TIP32B, these are the exact same replacement but in lower voltages like TIP32A can drive loads under 60V and TIP32B can drive loads under 80V.

Where We Can Use it & How to Use

TIP32C can be used in many general applications. When used as a switch it is capable to drive 3A load therefore it can be used to drive DC motors, LEDs, relays, bulbs and also at the output of arduio, raspberry pi and other platforms. Other than that it can also be used for many general audio and other signal amplification requirements.

Applications

• Separate Audio Amplifier
• Audio Amplifier Stages
• For Handling 3A Load
• DC Motors Driver and Controller
• Darlington Pairs
• Output of Arduino, Raspberry Pi and other Electronic Platforms
• high current switching (upto 2A) loads
• Can be used as medium Power switches
• Large signal amplification
• Speed control of Motors
• Half bridge circuits
• Inverter and other rectifier circuits

Package Include:

• 1 x TIP32C TIP32 TIP 32 Transistor 100V 3A 40W 3MHz PNP Transistor Bipolar BJT Silicon Power Transistor TO-220 Package 3 Pin