Description: BMS Battery Protection Board 6S 12A 25.2V 18650 AA AAA Lipo Li-ion Lithium Battery
- Brand new
- Size: approx.50*30*2mm
- Lampshift maximum discharge current: 15A
- Instantaneous discharge current: 25A
- Charging voltage: 25.5V
- Charging current: 15A (MAX)
- Overcharge detection voltage: 4.28 ± 0.05V
- Overcharge protection delay: 0.1S
- Overcharge release voltage: 4.08 ± 0.05V
- Over discharge detection voltage: 2.55 ± 0.08V
- Overdischarge detection delay: 0.1S
- The overdischarge release voltage: 2.9 ± 0.1V
- Overcurrent detection voltage: 150mV
- Overcurrent detection delay: 9MS
- Overcurrent protection current: 30 ± 3A
- Overcurrent protection release condition: Disconnect the load
- Short circuit detection delay: 250uS
- Short circuit protection Release condition: disconnect negative open
- Main circuit conduction resistance: ≤20mΩ
- Working current: ≤30uA
- Sleep current (battery over discharge) ≤10uA
- Temperature range: -30 / + 80 °
- Fine workmanship and durable.
- For the rechargeable (generally refers to the lithium battery) from the protection of the integrated circuit board.
- Lithium battery (rechargeable type) so need protection.
- As the lithium battery itself determines the material itself can not be overcharge, over discharge, overcurrent, short circuit and ultra-high temperature charge and discharge, so lithium battery lithium components will always follow a protective resistor with a sampling resistor and a current fuse.
Welding point Description:
- B+ connect Battery positive end;
- B1 connect the point between battery 1 and battery 2
- B2 connect the point between battery 2 and battery 3
- B3 connect the point between battery 3 and battery 4
- B4 connect the point between battery 4 and battery 5
- B5 connect the point between battery 5 and battery 6
- B- battery negative end
- P+ Charge/discharge positive end
- P- charge/discharge negative end
- Do not deliberately short circuit.
- After the line is connected, Need to charge first, then have output.
- When the battery is connected in series with 3 groups, Please ensure that the voltage of each battery is the same. If not same, please fill in each set of batteries and then use.
- Do not mix the good battery and the battery.
- The capacity of the battery internal resistance is closer will be better.
- Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better. Please buyers know the professional knowledge of this module before buying
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
- 1x BMS Battery Protection Board 6S 12A 25.2V 18650 AA AAA Lipo Li-ion Lithium Battery