•  This charge control module can automatically control charging and discharging to protect batter.
•  LED power supply with power display is more practical.
•  Wide range of applications, suitable for 3.7V-120V all lithium .
•  Automatically cut off power to save power and extend service life of .
•  The board has a bright 3-digit display with 0.1 accuracy shows the setting value.

Specifications:

• Model: HW-631 / XH-M602 (Both Are Same )
• Condition: 100% Brand New
• Item Type: Protection Board
• Material: Printed Circuit Board
• Color: As Pictures Shown
• Input Voltage: 220 VAC
• Display Accuracy: 0.1 v
• Control Accuracy: 0.1 v
• Output Type: Output Switch
• Scope: 3.7V – 120V all lithium
• Voltage Error: + 0.1 v / -0.1 v
• Use: In the setting voltage value, start button play button raised, about stop button role to down key
• Item size:86 x 58 x 24mm
• Item weight:68g

Use: In the setting voltage value, start button play button raised, about stop button role to down key

• 1. Set the start voltage: Normal display voltage state, press to a starting voltage button ,to display the start charging voltage. long Press the start button, digital flashes, by start and stop button, set the start charging voltage value.
• 2. Set Stop voltage: Normal Voltage normal display mode, press to a Stop voltage button ,to display the Stop charging voltage. long Press the Stop button, digital flashes, by start and stop button, set the Stop charging voltage value.
• 3. Setting Error: Energized state while holding down the start / stop button, digital display 888, which is the factory setting

Notes:

1. Due to the difference between different monitor, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2. Due to the manual measurement and different measurement methods, please allow 1-3cm deviation. Thanks

Package included:

• 1 x Battery Charger Control Module