This acrylic enclosure fits the popular W1209 Temperature Controller Module to help protect and electrically insulate the module.

These enclosures work well to enclose the module to provide a level of safety if it is being used to switch AC power and they look pretty good doing it.

This clear acrylic plastic case houses the XH-W1209 /  W1209 digital temperature controller. It includes all assembly hardware. It is shipped unassembled, assembly is required. Assembled Dimensions (L x W x H): 59mm x 51mm x 18mm (2.3″ x 2.0″ x 0.71″).

Features:

• Easy for electronic enthusiasts to assemble.
• Acrylic material, looks transparent(may need to tear down the film).
• DIY cover for XH-W1209 Control Module
• Acrylic Box ( without W1209 module )
• DIY cover for W1209 Control Module
• Acrylic material, looks transparent(may need to tear down the film).  
• Easy for electronic enthusiasts to assemble.

Specifications:

• Case for: W1209 Temperature Control
• Color: Transparent
• Material: Acrylic case
• Weight: 25 gm.
• Good Quality Material
• Crystal Clear
• Weight: 25 gm.
• Dimensions: 59 x 51 x 18mm
• Material Thickness: 2.4mm (0.1″)

Note: Product Images are shown for illustrative purposes only and may differ from actual product.

Assembly is straight forward.  Here are the basic steps to follow:

1. Remove protective paper from acrylic pieces.
2. Insert one of the larger M3 screws into one of the 4 mounting holes in the corners of the module.  Hold one of the round acrylic spacers on the back-side of the module and using a screwdriver, thread the screw into the acrylic spacer to hold it in place.  Repeat for all 4 corners of the module.
3.  Place the module on the bottom piece of acrylic which is the more solid of the two large pieces and attach it using the 4 larger nuts.
4. Insert each of the 4 side pieces into the slots in the bottom piece of acrylic.  Ensure the side piece with the cut-out is placed on the side with the screw terminals for wire access.
5. Place the top acrylic piece on top and guide the tabs into the slots in the top piece.
6. Install the 4 small long screws into the 4 corners of the case and fasten with the nuts.  Do not tighten to firmly or the acrylic will bend

Package Include:

• 1 x Casing For W1209 DC 12V Thermostat Incubator Temperature Controller Transparent Clear Acrylic Case Shell Housing Protection Box Clear Acrylic Box Shell Casing