Mini Liquid Level Sensor Analog Output Input Range 2V To 5V Water Level Detection Liquid Level Sensor Water Level Indicator

Mini Liquid Level Sensor Analog Output Input Range 2V To 5V Water Level Detection Liquid Level Sensor Water Level Indicator

The Mini Liquid Level Sensor is made to be inserted vertically into wet environments to detect liquid level from 0 to 1.88” (48 mm) or as an alarm. This sensor has a single analog output which may be directly connected to the Propeller Activity Board 4-channel A/D converter or easily interfaced with the MCP3002 A/D with a FLiP Multicore Microcontroller.

Features:

• Supported by BlocklyProp A/D Blocks and C library interfaces
• 2 to 5 volt analog output is easy to read by many controllers or A/D converters
• 9 inch (22 cm) 3-pin female-female extension cable included
• 2.0 mm mounting holes allow for rigid installation
• Detects tiny amounts of change in liquid levels in tight-space applications
• Fast response time
• Suitable for a variety of non-corrosive or non-toxic liquids (not meant for foods)

Application Ideas:

• Water level alarm for moisture-sensitive environments
• Water level indicator for fluid reservoirs
• Stream-level indicator when used in a controlled reservoir (stream well)

Mini Liquid Level Sensor Key Specifications:

• Voltage input range 2.0 V to 5.0 V
• Dimensions 0.75” x 2.48” (19.0 mm x 63.0 mm)
• Water level detection 0 to 1.88” (0 mm to 48 mm)
• Analog output
• Not for food applications

How to Use:

In the case of working with a MCU:

• VCC ↔ 2.0V ~ 5.0V
• GND ↔ power supply ground
• AOUT ↔ MCU.IO (analog output)