Description: Motor Driver L298N Dual Channel H-Bridge Motor Driver Control Module

RED Color L298N Motor Driver Module Dual Channel H-Bridge L298N Motor Driver Shield L298N Module

L298N Motor driver module is a high voltage, high current, and dual full-bridge driver. It accepts standard TTL logic level inductive loads like solenoids, relays DC motors, etc. this module controls two Dc motors at the same time in any direction and speed. There are two enable inputs, which enables or disables the device independently of the input signals.

The L298 is a monolithic integrated circuit in a 15-lead Multi watt and PowerSO20 packages. It is a high voltage, a high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC, and stepping motors. Two enable inputs are provided to enable or disable the device independently of the input signals. The lower transistor’s emitters of each bridge are connected and the corresponding external terminal can be used for external sensing resistor connection. During lower voltage, an additional power supply is provided for the logic to work properly.

L298 is a high power version of the L293d motor driver IC. It is a high voltage, high current, a dual full-bridge driver designed to accept standard TTL logic levels (Control Logic) and drive inductive loads such as relays, solenoids, DC, and Stepper motors. Two enable inputs are provided to enable or disable the device independently of the input signals.

Specification:

• Chip: L298N
• Logic voltage: 5V
• Logic current 0mA-36mA
• Storage Temperature: -20 ℃ to ℃ to +135
• Operating mode: H-bridge driver (dual)
• Drive voltage: 5V-35V
• Drive current: 2A (MAX single bridge)
• Maximum power: 25W
• Dimensions:43x43x27mm

Features:

• Driver chip: L298 dual H-bridge driver chip.
• Terminal driver part of the supply area VMS: +5 V ~ +35 V.
• Drive part of the peak current Io: 2A / Bridge.
• Logical part of the terminal power supply range Vss :4.5-5.5 V.
• Logical part of the operating current range: 0 ~ 36mA.
• The control signal input voltage range: 4.5-5.5V low 0V high.
• Maximum power consumption: 20W.
• Storage temperature: -25 ~ +130.

Applications:

• Motor driver Circuit.
• Robot rover motor control.
• DIY projects requiring motor driver.

Package include: 

• 1x Motor Driver L298N Dual Channel H-Bridge Motor Driver Control Module