Casing With XH-W1209 Digital LED Display Thermostat DC 12V W1209 Digital Temperature Controller Incubator Switch Module Board With NTC & Transparent Clear Acrylic Case Shell Housing Protection Box
৳ 230.00
Casing With XH-W1209 Digital LED Display Thermostat DC 12V W1209 Digital Temperature Controller Incubator Switch Module Board With NTC
This is XH-W1209 12V Digital Temperature Controller Module W/ Display and NTC Waterproof Temperature Sensor. W1209 Mini thermostat Temperature controller is low-cost 12V Temperature controller with 7-segment display and 3 switch keypad for setting temperature and other parameters. The module features an NTC thermistor temperature sensing and has an accuracy of 0.1 C. The XH-W1209 12V Digital Temperature Controller Module W/ Display and NTC Waterproof Temperature Sensor is an incredibly low cost yet highly functional thermostat controller. With this module, you can intelligently control power to most types of electrical device based on the temperature sensed by the included high accuracy NTC temperature sensor. Although this module has an embedded microcontroller no programming knowledge is required. 3 tactile switches allow for configuring various parameters including on & off trigger temperatures. The onboard relay can switch up to a maximum of 240V AC at 5A or 14V DC at 10A. The current temperature is displayed in degrees Centigrade via its 3 digit seven segment display and the current relay state by an onboard LED.
Casing For W1209 DC 12V Thermostat Incubator Temperature Controller Transparent Clear Acrylic Case Shell Housing Protection Box Clear Acrylic Box Shell Casing
This acrylic enclosure fits the popular W1209 Temperature Controller Module to help protect and electrically insulate the module.
These enclosures work well to enclose the module to provide a level of safety if it is being used to switch AC power and they look pretty good doing it.
This clear acrylic plastic case houses the XH-W1209 / W1209 digital temperature controller. It includes all assembly hardware. It is shipped unassembled, assembly is required. Assembled Dimensions (L x W x H): 59mm x 51mm x 18mm (2.3″ x 2.0″ x 0.71″).
W1209 With Casing Specifications :
- Model: W1209
- Temperature range :-50-110C
- Dimensions:48.5 * 40mm
- Temperature control mode: ON / OFF
- Resolution: When temperature is 0.1C, the resolution is -9.9~99.9, other temperature segment is 1C
- Control accuracy:0.1C
- Hysteresis accuracy:0.1C
- Refresh rate: 0.5S
- High temperature protection: 0-110C
- Supply voltage: DC 12V
- Static current: < 35MA, attract current < 65MA
- Output voltage: DC 12V
- Output power: 20A relay
- Measurement input: NTC (10K 0.5%) Waterproof Sensor
- Environment requirements: -10 ~ 60C , Humidity 20% -85%
- Case for: W1209 Temperature Control
- Color: Transparent
- Material: Acrylic case
- Weight: 25 gm.
- Good Quality Material
- Crystal Clear
- Weight: 25 gm.
- Dimensions: 59 x 51 x 18mm
- Material Thickness: 2.4mm (0.1″)
Features:
- Precise Temperature Control upto 0.1C
- Fast Acting Control of 0.5 seconds response time
- With Water proof sensor
- LED Display for Temperature, settings and warning
- LED Relay Status Indicator
- Output Relay can be used with both AC and DC circuits
-
100% complete machine chip, wave soldering, stable performance, good consistency
-
Embedded central processor chip (MCU), more intelligent, lower power consumption
-
Power-off settings automatically memory (MCU built-in EEPROM storage unit)
-
The control accuracy of 0.1 degrees Celsius
-
Hysteresis 0.1 from the set, you can control the decimal (0.1-15.0)
- Easy for electronic enthusiasts to assemble.
- Acrylic material, looks transparent(may need to tear down the film).
- DIY cover for XH-W1209 Control Module
- Acrylic Box ( without W1209 module )
- DIY cover for W1209 Control Module
- Acrylic material, looks transparent(may need to tear down the film).
- Easy for electronic enthusiasts to assemble.
How to use:
- Connect the power supply and the load, you can supply to the controller,
- Is displayed as a measured temperature,
- Press the SET button, the display flashes the temperature,
- Press – to set the desired temperature,
- After setting press SET to confirm return,
- The controller automatically performs the relay by setting off!
- Lights, LED status descriptions:
- Indicator: Off The relay is switched off, Always indicate the relay is closed.
- LED: Shows LL is the sensor open, showing? HH is out of range, the thermostat will be forced to close the relay, the display — as high temperature protection.
Case Assembly is straight forward. Here are the basic steps to follow:
- Remove protective paper from acrylic pieces.
- Insert one of the larger M3 screws into one of the 4 mounting holes in the corners of the module. Hold one of the round acrylic spacers on the back-side of the module and using a screwdriver, thread the screw into the acrylic spacer to hold it in place. Repeat for all 4 corners of the module.
- Place the module on the bottom piece of acrylic which is the more solid of the two large pieces and attach it using the 4 larger nuts.
- Insert each of the 4 side pieces into the slots in the bottom piece of acrylic. Ensure the side piece with the cut-out is placed on the side with the screw terminals for wire access.
- Place the top acrylic piece on top and guide the tabs into the slots in the top piece.
- Install the 4 small long screws into the 4 corners of the case and fasten with the nuts. Do not tighten to firmly or the acrylic will bend
Application:
- Indoor Room Temperature Control
- Aquarium temperature controller
- Temperature controller for Controlled Temperature sheds
- Food and Beverage temperature controller
- Temperature controller for Health Care application
Package Included:
- 1 x Casing With XH-W1209 Digital LED Display Thermostat DC 12V W1209 Digital Temperature Controller Incubator Switch Module Board With NTC & Transparent Clear Acrylic Case Shell Housing Protection Box
Only logged in customers who have purchased this product may leave a review.
Related products
Microcontroller, ICs & Base
Microcontroller, ICs & Base
Reviews
There are no reviews yet.