Description: BH1750FVI Digital Light Intensity Sensor Module
GY-302 BH1750FVI BH1750 BH 1750 Chip Digital Light Intensity L.U.X Sensor Module DC 3V-5V IIC I2C Interface Digital Light Intensity Illumination Sensor Module 16Bit AD Converter For i2C Raspberry Pi Arduino
BH1750FVI Is a Digital Light sensor , which is an digital Ambient Light Sensor IC for I2C bus interface. This IC is the most suitable to obtain the ambient light data for adjusting LCD and Keypad backlight power of Mobile phone. It is possible to detect wide range at High resolution.
Features:
- I2C bus Interface ( f / s Mode Support )
- Spectral responsibility is approximately human eye response
- Illuminance to Digital Converter
- Wide range and High resolution. ( 1 – 65535 lx )
- Low Current by power down function
- 50Hz / 60Hz Light noise reject-function
- 1.8V Logic input interface
- Light source dependency is little. ( ex. Incandescent Lamp. Fluorescent Lamp. Halogen Lamp. White LED. Sun Light )
- It is possible to select 2 type of I2C slave-address.
- Adjustable measurement result for influence of optical window
- ( It is possible to detect min. 0.11 lx, max. 100000 lx by using this function. )
- The influence of infrared is very small.
Specifications:
- Model No: GY-302
- Operating voltage (VCC): 3 V to 5V
- Operating current: 120uA (typ) 190uA (max)
- Operating Temperature: -40°C ~ 85°C
- Sensor Resolution: 16 Bits
- Peak wavelength: 560nm
- Interface Type: I2C
- I2C Device Address: 0x23 (when ADDR = LOW) or 0x5c (when ADDR = HIGH)
- On board Level Translators: No (requires level translator for 5V logic interface)
- I2C Maximum Clock frequency: 400KHz
- PCB size: 19.25 mm x 14.4 mm
- Weight : 1.1g (including header)
Pinouts:
- VCC : Power Connection (3V – 5V)
- GND: 0V
- SCL: I2C Clock Input
- SDA: I2C Data IO
ADDR: I2C Address Configuration Input
Package Includes:
- 1x GY-302 BH1750 16-Bit Serial Output Light LUX Sensor Module
Reviews
There are no reviews yet.